Hey guys, I wanted to remove the pair system on my bike but want to make sure I do it right.do I use the hayabusa block off plates then remove the metal tubes and rubber hoses? I assume that I should block off the hose that attaches to the pair itself. I wasnt able to find a good guide or anything on removing the pair system
That does it. Block off the hose where the T is on the carbs.
Also block off that extra hole it goes to in the air box.
http://www.ebay.com/itm/HAYABUSA-GSX-R-1300-GSX1300R-GSXR-EXHAUST-EMISSIONS-PAIR-VALVE-BLOCK-OFF-PLATES-/281292142151?pt=Motorcycles_Parts_Accessories&hash=item417e517647&vxp=mtr (http://www.ebay.com/itm/HAYABUSA-GSX-R-1300-GSX1300R-GSXR-EXHAUST-EMISSIONS-PAIR-VALVE-BLOCK-OFF-PLATES-/281292142151?pt=Motorcycles_Parts_Accessories&hash=item417e517647&vxp=mtr) is this the right one?
Removing the pieces really isn't required if all you want to do is stop the Pair from working, you block off it's source of air by plugging the hose from the air box that will effectively stop the Pair from working.