I've got a '90 GS with practically new tires (have about 200mi on them). The tank has been cleaned and resealed, V & H exhaust, K & N pod filters (has been re-jetted for these), Sargent seat, SS lines front & back, Progressive springs, clip-ons, & windscreen. Extra parts include: spare forks (no springs), air box, factory seat, factory exhaust, and some other things (would need to look around to see what other parts are there).
It was running great until my dog knocked it over. It starts if you jump the starter. I just don't have the time, money, or energy to keep troubleshooting it.
I've put in around $1200 in her, but I'd like to get $800.
(Photo doesn't show Sargent seat or windscreen)
Located in Houston Area
(https://lh6.googleusercontent.com/-DzSo6kKu8rE/SMWx0lOEQvI/AAAAAAAAAI0/SLX0EvhA9Yg/s460/DSCN0357.JPG)
possibly interested in the V&H exhaust, how much for that? also what is the condition of it
are those clip on's from an 89? if so how much for that as well?
Price on front and rear stainless lines
Sent from my heart using my fingers
Which windshield?
I'm probably interested.
Sorry for the late response...
Quote from: lefgee on June 07, 2014, 02:31:36 PM
possibly interested in the V&H exhaust, how much for that? also what is the condition of it
are those clip on's from an 89? if so how much for that as well?
Condition of the exhaust is good; light to minimal scratches - $100 + s\h
Clip on's we bought from The Buddha (not sure if they're OEM)
Quote from: Sycotravis on June 07, 2014, 10:34:58 PM
Price on front and rear stainless lines
Say $50 + s\h
Quote from: Alan_nc on June 08, 2014, 07:36:01 AM
Which windshield?
I'm probably interested.
The windshield is a Nation Cycle model F-15 (clear). If you want it...$50 + s\h
If alan_nc isn't interested, I am. I have a F-16 sport and at full up position, the wind hits me right in the mouth area. I assume this is the F-15 touring? does the wind go over your helmet?
Quote from: drnickriviera on June 09, 2014, 06:25:49 AM
If alan_nc isn't interested, I am. I have a F-16 sport and at full up position, the wind hits me right in the mouth area. I assume this is the F-15 touring? does the wind go over your helmet?
Yes, this is the touring. It creates a nice bubble over my helmet. Of course I guess it all depends on how tall you are.
I'll take the windshield.
Sent you a PM
Quote from: dlighthill on June 09, 2014, 05:53:10 AM
Sorry for the late response...
Quote from: lefgee on June 07, 2014, 02:31:36 PM
possibly interested in the V&H exhaust, how much for that? also what is the condition of it
are those clip on's from an 89? if so how much for that as well?
Condition of the exhaust is good; light to minimal scratches - $100 + s\h
Clip on's we bought from The Buddha (not sure if they're OEM)
PM'd
If you decide to do a full part-out, how much for the tank? And what did you "coat" it with?
Mine had been "Kreem"ed by PO but they didn't do a good job and it has continued to rust and the coating is now peeling off and I am afraid it has developed some pinholes. I am toying with the idea of using the POR-15 system but if yours in in decent shape it could make my life alot easier.
Also, since I assume I would be getting the gas cap, I would also be interested in the seat lock and ignition as well (along with any keys) so that I could have a matched set.
Let me know if you decide to do a part-out.
HOuston here,...pm'd you :thumb:
Still have that gas tank? How rusty is it? and most of all how much would you want for it?
The tank is good. I cleaned and re lined it about 5 yrs ago.
I doo need to say that I have a few interested buyers for the whole bike.
Can't blame them, could you keep me in the loop i have my restore project so far pretty stalled due to two massive leaks in my tank...
Got the windshield. Thanks. Packed great and shipped quickly.
I posted in the general area about how great it is to ride with it on.
How much for the top end shipped to 91776?
Interested in the clip ons wouldn't they fit any year bike? 2007 to be exact
any updates with parting this bike out?
Interested in the forks. What's the condition of the inner tubes?
I'm in need of the master cylinder for the front brake, the bracket that holds the tank down on the rear part of the tank, and the frame petcock. Can I get a picture and a price plus shipping to 65807 ?
If you decide to part the bike out, I would also be interested in the tank. I understand that there are others in front of me so I would be happy to get in line. Also looking for the front fender mounting brace. Thanks
any pictures of the seat?
Still have the speedometer/tachometer cluster? ?? If so how much???