Ok so i know that i need the following jets for my mods on my bike. I am looking on the Sudco.com website and trying to find out which jet style i need.
Pilot-20
Mid Main-65
Main-145
on the sudco site, there are alot of jets that all look similar, which ones do i need?
i think i need a VM22/210 pilot
for the main jets and mid main there are large rounds and small rounds... idk which ones i need.
here is the link that i am looking at.
http://www.sudco.com/mikunijets.html
thansk!!!
This is where I get mine, the site you posted gave me a headache..... http://jetsrus.com/a_jet_kit_street/suzuki_500_GS500F.htm (http://jetsrus.com/a_jet_kit_street/suzuki_500_GS500F.htm)
Am I correct in assuming that those jets are only the pilot and the mid? What about the main jet?
Quote from: BigBabyMoses06 on August 05, 2014, 02:05:31 PM
Am I correct in assuming that those jets are only the pilot and the mid? What about the main jet?
My JetsRus post has Pilot and
Main jets
Edit: I just discovered that the main jet is a 2 piece thing, so thats why I was confused about the pictures.
Another edit: Concerning the mid main, that is the same fitment as the main?
Thanks.
ok so since the gs500f has a main and MID main, i need 2 main jets per carb right?
i want to jet my bike as follows:
Pilot 20
Mid main 65
Main 145
so i need to buy-
(2) pilot 20 jets
(2) main 65 jets
(2) main 145 jets
is that correct?
Sounds right to me. Im pulling mine tomorrow to see whats in there now, and then ill probably be ordering some new ones.
Still looking for a cheaper source.
Quote from: BigBabyMoses06 on August 12, 2014, 08:01:18 PM
Sounds right to me. Im pulling mine tomorrow to see whats in there now, and then ill probably be ordering some new ones.
Still looking for a cheaper source.
Long before computers or the internet, I would go to a motorcycle dealer and get jets over the counter from the parts dept, I see no reason for that to have come to an end?
Slip on and pods are 20/147.5 with a 65 mid optional, 1 O ring under the needle and 3 turns on the air screws.
Now I have these tha tI sell. The kit with these is $25 shipped in US. Also includes stainless allen head bolts for the bowls so you can take em off with out taking carbs off the bike.
Cool.
buddha.
Quote from: Suzuki Stevo on August 13, 2014, 05:47:01 AM
Quote from: BigBabyMoses06 on August 12, 2014, 08:01:18 PM
Sounds right to me. Im pulling mine tomorrow to see whats in there now, and then ill probably be ordering some new ones.
Still looking for a cheaper source.
Long before computers or the internet, I would go to a motorcycle dealer and get jets over the counter from the parts dept, I see no reason for that to have come to an end?
The closest suzuki shop with parts in stock is over an hour away :(
https://www.rockymountainatvmc.com They have good prices it seems.
I'm just getting 4 jets otherwise I would go with you Buddha.
Yea 4 jets - that 2 20's and 2 147.5's ... 65's are optional - as in - if you need em you ahve to ask and order em ... they cost $8 for the pair.
Anyway this is only for gstwinners to have the correct parts. I've seen horror cases, new jets in old carbs, old jets in new carbs, pilots with holes on the sides in the old carbs and all sorts of headaches.
Cool.
Buddha.
Ill have mine tomorrow wooo! Hope this solves it :)
Buddha, I should have listened to you in the beginning. Lesson learned. I opened up the carbs and sure enough they were stock. My shop never even looked at them :(
Quote from: The Buddha on August 13, 2014, 06:18:51 AM
Slip on and pods are 20/147.5 with a 65 mid optional, 1 O ring under the needle and 3 turns on the air screws.
Now I have these tha tI sell. The kit with these is $25 shipped in US. Also includes stainless allen head bolts for the bowls so you can take em off with out taking carbs off the bike.
Cool.
buddha.
thanks!! i will want the 65 mid's for sure. i will PM you as soon as i am ready to order!!
thanks you for the great help
Quote from: BigBabyMoses06 on August 13, 2014, 01:08:22 PM
Ill have mine tomorrow wooo! Hope this solves it :)
Buddha, I should have listened to you in the beginning. Lesson learned. I opened up the carbs and sure enough they were stock. My shop never even looked at them :(
LOL, but I dont recall what it was I told you ... but OK.
Cool.
Buddha.
Took it to a shop, they worked on it for 2 months, said I needed to replace the carbs entirely.
Anyone have the dimensions for the #4 washers?