FOR SALE! AND GO!!! I can put reserves on parts for people up to 2 weeks!
DISCLAIMER: The earliest I can get parts off and sent out is the weekend of March, 13
For sale is a 1993 GS500E with many parts/upgrades, ~24,000 miles
DISCLAIMER: Runs, but I'm tired of futzing with the carbs so in its current state it runs REALLY rough and needs a new battery.
Parts List (Upgrades only):
-Engine/Fueling:
Factory Pro tune kit and Carbs (extra 150 size mains)
K&N Lunchbox filter
V&H Supersport exhaust
Pingel High flow tank petcock and adapter plate
-Handling:
Front forks with .85kg/mm sonic springs
Thick billet fork brace
GSX-750 rear shock
Never Used Vortex clip ons
Katana 600 rear wheel w/brand new bridgestone s20 150/60 and wave rotor
GS500 front wheel w/brand new bridgestone s20 110/70
Stainless steel brake lines front/back
Katana brake torque bar
-Frame/controls:
SV650 Master cylinder (front) w/lever
SV650 clutch perch w/lever and cable
GSXR-600/1000 right and left rear sets w/adapter plates, hardware, custom adjustable linkage (L) and master cylinder (R)
Custom rear under tray w/LED taillight, seat lock w/keys, license plate bracket, and riv-nuts (Can tuck all electronics inside)
Parts (Stock):
Frame-Local pickup/delivery (extra) only, clean title
Engine-Local pickup/delivery (extra) only, runs just fine
Seat
Wiring harness x 2
Rectifier
CDI
Turn Signal Relay
Secondary relay
Starter solenoid
Headlight
Tach/speedo w/housing and lights
Left hand control
Right hand controls w/throttle tube and cable
Carbs (Drilled out caps) Factory pro tune kit included, just rebuilt with K&L rebuild kit
Tank, minor rust around the fill hole (Evaporust works amazing to get it out)
Triple clamps
Rear brake assembly (including mountig bracket)
Front brake assembly
Rear axle w/spacers and hardware
Front axle w/spacers and hardware
Speedo cable and sensor
Tach cable
Ignition coils w/cables x 2
Stock rear light
Stock turn signals
Fuel petcock (Vacuum assembly removed)
Battery Box
Custom rear axle adjusters with spools
Black anodized keyless quick filler for gas tank
(All necessary hardware will come with their respective parts)
[attachment deleted by admin]
Ill put dibs on the headlight, brackets, and front forks, if it gets parted out. :thumb:
I'm interested in the left hand control, the front springs (if the Fink didn't want those with the forks), and possibly the V&H exhaust
Quote from: BikerMedic on February 21, 2015, 06:29:35 AM
I'm interested in the left hand control, the front springs (if the Fink didn't want those with the forks), and possibly the V&H exhaust
The left hand controls from the first gen SV650s are direct bolt on's for the GS500. I know for a fact. there's other bikes too. but the sv650 I know fits.
Quote from: J_Walker on February 21, 2015, 07:13:29 AM
Quote from: BikerMedic on February 21, 2015, 06:29:35 AM
I'm interested in the left hand control, the front springs (if the Fink didn't want those with the forks), and possibly the V&H exhaust
The left hand controls from the first gen SV650s are direct bolt on's for the GS500. I know for a fact. there's other bikes too. but the sv650 I know fits.
Good to know, thanks!
Quote from: BikerMedic on February 21, 2015, 06:29:35 AM
I'm interested in the left hand control, the front springs (if the Fink didn't want those with the forks), and possibly the V&H exhaust
I don't need the springs, Im actually just after the left tube, I have one that's bent.
how much for the right hand controls and speedo/tach assembly and cables?
I call dibs on the rearsets!
-snip-
Dibs on the Tank, unless I missed out. How much are you asking? I live in the PacificNW, btw, for shipment.
Cheers!
BUY MY STUFF! I am parting out my bike this coming weekend so I can guarantee shipment very soon!!
I'm interested in:
"SV650 Master cylinder (front) w/lever
SV650 clutch perch w/lever and cable
GSXR-600/1000 right and left rear sets w/adapter plates, hardware, custom adjustable linkage (L) and master cylinder (R)"
Can I get some close-up pics and how much $$?
Thanks,
Iarn
How much for the katana wheel and brake arm? I PM'd ya!
Buy my stuff! Its getting close to time to strip down and send out parts. After this weekend I won't be around the bike for a while.
I'm interested in the exhaust and jets.
Can I see pics of the rear under tray?
How much do you want for it?
How much do you want for the Pingel Petcock?
THIS IS THE LAST WEEKEND I'LL BE ABLE TO SEND OUT ANY PARTS BEFORE I LEAVE THE COUNTRY FOR SEVERAL WEEKS!
pics of clip ons? and price?
How much for the carbs? Can I throw them on a stock 93 and tune them?
Last call before I leave this week! And please PM me if you want a part or are interested/want more pictures.
I received my parts today, they were shipped on the 16th of March. They arrived in a bin with the box destroyed because they were packed poorly and it was a very flimsy box. Thank God everything was there, minus a butt ton of blade fuses i was promised, I'll live without those. I'm not trying to sound like a negative Nancy, but when you pay good money for something, you expect it to be boxed in a manner that will survive a trip across the country. I'm happy with the parts I got so I'm done bitchin. :mad:
Quote from: The fink on April 07, 2015, 02:50:36 AM
I received my parts today, they were shipped on the 16th of March. They arrived in a bin with the box destroyed because they were packed poorly and it was a very flimsy box. Thank God everything was there, minus a butt ton of blade fuses i was promised, I'll live without those. I'm not trying to sound like a negative Nancy, but when you pay good money for something, you expect it to be boxed in a manner that will survive a trip across the country. I'm happy with the parts I got so I'm done bitchin. :mad:
pics or it didn't happen.
I'm curious to see the damage, as well.
(http://i1383.photobucket.com/albums/ah291/chriscwhite1/Mobile%20Uploads/20150407_083958_zpsdzesw3as.jpg) (http://s1383.photobucket.com/user/chriscwhite1/media/Mobile%20Uploads/20150407_083958_zpsdzesw3as.jpg.html)(http://i1383.photobucket.com/albums/ah291/chriscwhite1/Mobile%20Uploads/20150407_083949_zpsdu7ww6uq.jpg) (http://s1383.photobucket.com/user/chriscwhite1/media/Mobile%20Uploads/20150407_083949_zpsdu7ww6uq.jpg.html)(http://i1383.photobucket.com/albums/ah291/chriscwhite1/Mobile%20Uploads/20150407_083936_zpscgryyxhx.jpg) (http://s1383.photobucket.com/user/chriscwhite1/media/Mobile%20Uploads/20150407_083936_zpscgryyxhx.jpg.html)
Don't know about you guys, but I wouldn't ship forks, and a headlight in a box made for folding chairs. Maybe that's just me.
Quote from: The fink on April 07, 2015, 10:48:20 PM
Don't know about you guys, but I wouldn't ship forks, and a headlight in a box made for folding chairs. Maybe that's just me.
thats clearly already been opened. so that doesn't prove anything. :icon_lol: O0
I'm just yanking your chain. :tongue2:
but forks are tough things, and I've personally dropped that E headlight many times on concrete without cracking the glass, that stuff is STONK. My thoughts is, blame the postal service.
Wow, that's crazy. Hopefully it had a lot of packing material.
some newspaper and thankfully the headlight was wrapped in bubble wrap. All is good though, I got my stuff and that's what matters now :thumb:
Still have the engine? How much to Houston Texas
Hi,
I have a 2005 GS500F I am wondering if the carbs would fit? I am interested
in the Factory Pro tune kit and Carbs (extra 150 size mains)
Thanks,
Curt
Would you be willing to sell the gas tank?