Yoda took the rest of the parts. Hope all the parts work well for everyone
Picture of headlight please?:)
Sent you a PM about the headlights and the side bags. Pictures would be appreciated. Thank you.
Pm incoming.....
I'd like the forks, case guards, manual, and clutch/brake levers.
How did you like the handle bars?
Yes the bars - are they .188 wall ?? if so, that is first iteration. They didn't have a plug weld type weld in the 2 welds and the ends weren't drilled to take press fit bar ends.
The second iteration was .120 wall, had welded plugs at the welds and ends were drilled for press fit weights.
These fit a 90-00 easy like a glove. They dont quite fit the 01 - 02, and they really hit everything on a 04+.
Not only that, the round cover is also a masterpiece from a local (now dead - I think these were made by the old guy) machinist. Bloody near indestructible, and rather industrial chic if you ask me ...
Who did you buy your bike from ?
Cool.
Buddha.
And the case guards too were hacked up by yours truly ...
Cool.
Buddha.
Hey - if no one has called it, and you wanna stay with your Aluminum Stator cover, some scratches. $2
I'll take it.
Pm me and I'll paypal you.
Cool.
Buddha.
I measured 1/8" walls, so looks like .120 it is
All these parts were from germ0191. Guess his engine blew and these were the spare parts he had lying around. I told him whatever I didn't use i'd spread the love. I'd rather not charge for anything, but this takes a lot of time to take pictures, answer PMs and ship stuff out.
Oh and these are from a 95' not a 96' don't think it really matters, but thought I should say
Quote from: The Buddha on April 28, 2015, 07:22:02 PM
Yes the bars - are they .188 wall ?? if so, that is first iteration. They didn't have a plug weld type weld in the 2 welds and the ends weren't drilled to take press fit bar ends.
The second iteration was .120 wall, had welded plugs at the welds and ends were drilled for press fit weights.
These fit a 90-00 easy like a glove. They dont quite fit the 01 - 02, and they really hit everything on a 04+.
Not only that, the round cover is also a masterpiece from a local (now dead - I think these were made by the old guy) machinist. Bloody near indestructible, and rather industrial chic if you ask me ...
Who did you buy your bike from ?
Cool.
Buddha.
120 wall - there were a few guys that wanted non drilled, cos they either were going to not use weights, or weld in a nut ... I remember a few that had that request. I dont remember selling much of anything to germ101 though.
Cool.
Buddha.
Hey man, the Raven guy is needing that cover too. I'll drop that if he buy it off you.
I'll take the rest though. That rear brake I have to have now.
Cool.
Buddha.
Quote from: The Buddha on April 29, 2015, 03:55:57 PM
Hey man, the Raven guy is needing that cover too. I'll drop that if he buy it off you.
I'll take the rest though. That rear brake I have to have now.
Cool.
Buddha.
Yeah he contacted me yesterday about it, but he thought the 89' was a slightly different design and this one wouldn't work????
do you still have the carbs? if you do I'll take them Bill gise
Quote from: drnickriviera on April 29, 2015, 05:03:49 PM
Quote from: The Buddha on April 29, 2015, 03:55:57 PM
Hey man, the Raven guy is needing that cover too. I'll drop that if he buy it off you.
I'll take the rest though. That rear brake I have to have now.
Cool.
Buddha.
Yeah he contacted me yesterday about it, but he thought the 89' was a slightly different design and this one wouldn't work????
Round ignition cover = round ignition cover = round ignition cover on all GS'es. 89-09.
It will even fit GS400 and 450.
Cool.
Buddha.
I'll try here before I post a whole thread. Will 96 rims for an 05 gsf?
Quote from: bill gise on April 29, 2015, 05:11:22 PM
do you still have the carbs? if you do I'll take them Bill gise
Still have em, send me a pm with your zip and i'll get a shipping quote
Quote from: rainbballer17 on April 29, 2015, 08:54:34 PM
I'll try here before I post a whole thread. Will 96 rims for an 05 gsf?
Yep. Only difference is the color.
Do you still have the tank from the 96? Could uoh please put up some pics of it.
If the sales for the forks and carbs don't work out, I'd like them.
Thanks,
Trwhouse :)
What about that manual, is it still available?
Thanks,
Alex
Quote from: axexandru on May 05, 2015, 03:54:45 AM
What about that manual, is it still available?
Thanks,
Alex
Shipped out today
Going to be pretty busy for the next week, so i won't be able to ship out anything. I'll still try to get pictures and shipping quotes
If no one has taken the carbs of that '06 I have a particular thing I need off them if you're willing.
http://gstwins.com/gsboard/index.php?topic=68891.0 (http://gstwins.com/gsboard/index.php?topic=68891.0)
This is what I need.
Quote from: ragecage23 on May 06, 2015, 10:33:09 AM
If no one has taken the carbs of that '06 I have a particular thing I need off them if you're willing.
http://gstwins.com/gsboard/index.php?topic=68891.0 (http://gstwins.com/gsboard/index.php?topic=68891.0)
This is what I need.
Carbs are off a 95'. I don't see that part on it.
Alright thanks.
Is the clutch lever still available? I see someone asked about it; but it's not crossed off.
Quote from: 78530i on May 18, 2015, 01:04:45 PM
Is the clutch lever still available? I see someone asked about it; but it's not crossed off.
It is gone. Does it not show crossed out for anyone else?
In the list it is crossed off, but above the photobucket link it isn't.
Sent ya a PM
do you happen to have a chain tensioner thats still good? LOL im in the market all the sudden for one. :icon_rolleyes:
Quote from: J_Walker on May 24, 2015, 03:37:33 PM
do you happen to have a chain tensioner thats still good? LOL im in the market all the sudden for one. :icon_rolleyes:
don't have that part
okay thanks anyway.
Are the rims still available?
Quote from: Nitsua552 on June 13, 2015, 11:28:08 AM
Are the rims still available?
yes, it's around $35 to ship the rear wheel and $25 for the front
Hey, do you still have the Cylinder head, Head Gasket, and Grip?
(sent you a PM)
Seat PM sent
What parts are still available?