Need to drain the gas tank as I am planning on replacing all the fuel and vacuum lines. Of course I have a full tank at the moment.
Can someone tell me what is the easiest way to drain the tank?
Thanks......
I have about 5 feet of 1/2 Diameter Tygon Tubing I use to siphon the gas from the tank into a 5 gallon container, I have already done this process 3 times this week working on the M50 (aim for the lowest point in the tank) :thumb:
(http://home.comcast.net/~stykers/m50drain.jpg)
I obviously haven't done it on a GS500, but I've drained tanks thru the carbs as well. Get a gas tank like Stevo shows and hook up a line from the float bowl drains. Open up the drain screw and turn your petcock to prime.
Could you also take the tub off the petcock and run a larger tube onto that tube?
yep, you could also pull the tank and just put the tubing directly onto the bottom petcock :thumb: (sorry if that's what's steve's picture shows, it's not loading for me :technical: )