Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => Projects / Builds, Racing and Tech => Topic started by: scotty110788 on July 24, 2015, 01:50:26 AM

Title: Master cylinder
Post by: scotty110788 on July 24, 2015, 01:50:26 AM
How do you take this apart to replace rubber and that, looking to powder coat but can't seem to get bottom bit off (http://images.tapatalk-cdn.com/15/07/24/9d6b51e7e554b7dd3c21848b900a0678.jpg)


Sent from my iPhone using Tapatalk
Title: Re: Master cylinder
Post by: Big Rich on July 24, 2015, 06:05:24 AM
I think you have to pry the rubber boot back away from the body, and the piston is held in with a circlip.
Title: Re: Master cylinder
Post by: scotty110788 on July 24, 2015, 06:32:39 AM
Thanks mate 👍


Sent from my iPhone using Tapatalk
Text only | Text with Images