GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: Tia813 on September 15, 2015, 06:06:00 PM

Title: Too lean? Pic
Post by: Tia813 on September 15, 2015, 06:06:00 PM
Just wondering if this is too lean. Pulls strong and no stumbling or hesitation. Cruising speeds cant really feel anything abnormal, even when rollin the throttle. I'm not complaining just curious. #40 pilot 3 turn out, 127.5 mains and one washer. Running drop in KnN with full Jardine exhaust.
(http://i291.photobucket.com/albums/ll318/TIA813/Mobile%20Uploads/image_1.jpg) (http://s291.photobucket.com/user/TIA813/media/Mobile%20Uploads/image_1.jpg.html)
Title: Re: Too lean? Pic
Post by: Tia813 on September 15, 2015, 06:06:55 PM
Should have previewed the post.... Sorry for the huge pic
Title: Re: Too lean? Pic
Post by: twocool on September 16, 2015, 01:37:54 AM
not lean according to pics....maybe even a tad rich..what is fuel economy with home brew carb jets and other mods?

Cookie
Title: Re: Too lean? Pic
Post by: Big Rich on September 16, 2015, 04:05:48 AM
I'm with Cookie on this one. Maybe a little rich but nothing to really be worried about it.

Does the filter have the restriction ring installed, and when was is cleaned last?
Title: Re: Too lean? Pic
Post by: The Buddha on September 16, 2015, 09:10:14 AM
Cant see the pic, but 40/127.5/3 turns for K&N drop in and slip on would be on the nose.
Have washers under the needle ?? 0-1-2 - all normal here. Nothing to worry about.
Cool.
Buddha.