Hello fellow members, I'm finally finished with the swap from 96e to 09e.
I have a parts bike available in part or whole. If anyone needs a part in particular, let me know.
I have PayPal and also an established eBay account that I can set up an auction ( buy it now) for any item someone is interested in.
(http://uploads.tapatalk-cdn.com/20160322/e4b73ce34fb161fa348737a3d5ca601c.jpg)
I can send photos of anything you need, just let me know
Thanks
Sent from my LG-D851 using Tapatalk
:o
OOOOHHHHHH!!
Are the side-plastics intact? How about the gauge cluster?
Yes, I have the side plastics. Speedo is gone but I have a digital I can give you for $20
Sent from my LG-D851 using Tapatalk
Hey there!
I'm looking for the bar ends and front fender mid guard + hardware.
Quote from: Smil3y on March 22, 2016, 11:10:26 AM
Yes, I have the side plastics. Speedo is gone but I have a digital I can give you for $20
Sent from my LG-D851 using Tapatalk
Check your messages. :)
Quote from: Hupjai on March 22, 2016, 03:13:59 PM
Hey there!
I'm looking for the bar ends and front fender mid guard + hardware.
$5 for the pair of bar ends $20 for the fender plus shipping
Sent from my LG-D851 using Tapatalk
Quote from: Smil3y on March 22, 2016, 11:10:26 AM
Yes, I have the side plastics. Speedo is gone but I have a digital I can give you for $20
Sent from my LG-D851 using Tapatalk
$25each for the plastics
Sent from my LG-D851 using Tapatalk
Thanks for the quick PM! :kiss3:
No problem, I'll get some shipping rates to all soon as I get home
Sent from my LG-D851 using Tapatalk
Headlight ears and the black swivelly things with all the bolts and what not - send me a price please.
Cool.
Buddha.
Quote from: The Buddha on March 23, 2016, 03:57:49 PM
Headlight ears and the black swivelly things with all the bolts and what not - send me a price please.
Cool.
Buddha.
Sorry the headlight and brackets were donated to my new project bike.
So far, I've already used the headlight and brackets, front forks, and clutch lever.
Sold or spoken for so far:
Speedometer
Side Plastics
RH side engine cover
Front fender
bar ends
I have most of the parts in my car, so I'll weigh everything up tomorrow at work.
In need of a center stand and hardware. Let me know if it's kicking around and how much shipped to 24141
Quote from: steezin_and_wheezin on March 25, 2016, 08:56:43 AM
In need of a center stand and hardware. Let me know if it's kicking around and how much shipped to 24141
I still have that, $40 with free shipping ok?
Mud flap and bar-ends shipped. Who's next?😎
Sent from my LG-D851 using Tapatalk
:woohoo:
Carbs ????
Send me price.
Thanks.
Buddha.
I need part of the tank. The petcock + Filter.
Did you say something about a digital speedo? Whatsit look like?
Curious to know the cost of the tank and the top triple clamp with the ignition key switch (+ the keys)
Quote from: lucas on March 30, 2016, 06:40:06 AM
Did you say something about a digital speedo? Whatsit look like?
Curious to know the cost of the tank and the top triple clamp with the ignition key switch (+ the keys)
(http://uploads.tapatalk-cdn.com/20160330/2ca9778606f37eb9707a69f1a7947438.jpg)
Stay tuned for parts estimate...
Sent from my LG-D851 using Tapatalk
Is the signal generator available and in working order? Would be interested to know your price shipped to 98337.
Quote from: DesertFox on March 30, 2016, 09:46:27 PM
Is the signal generator available and in working order? Would be interested to know your price shipped to 98337.
It has a magnetic sensor and bolt you have to connect. I have all the parts. I'll post a pic of everything tonight.
Several members are waiting for estimates, I promise to get back to all by Saturday. I'm going to start stripping down the bike, boxing and tagging parts.
Appreciate all the responses!
Sent from my LG-D851 using Tapatalk
Just to make sure we're talking about the same thing :wink:
(https://dl.dropboxusercontent.com/u/63195209/GS500/SignalGenerator.jpg)
Thanks!
Cory
Has anyone claimed the tank? If not, I am VERY interested. Don't need the petock so you could send that to previous poster.
Shipping would be to NC.
Thanks,
Kyle
Hello! I'm new to the forum and new to the GScrowd. (that's my half assed introduction).
Anyway. what are you asking for the tank? Just the tank, no petcock, and no gas cap. I got a free '96. trying to make it at least look like it's worth something =D
Do you still have the speedo and where does it hook up to the fuel to sense the fill level
Quote from: smberens on April 01, 2016, 04:31:37 AM
Do you still have the speedo and where does it hook up to the fuel to sense the fill level
I do still have the speedo, however I never got the fuel gauge working. I gave up on it. I have a hall effect speed sensor and magnetic bolt that you have to hook up. Give me $20 and you can have it.
Sent from my LG-D851 using Tapatalk
What brand or what kind of bike is the speedo from
Quote from: smberens on April 01, 2016, 05:51:14 AM
What brand or what kind of bike is the speedo from
it's a Koso RX-2N. Aftermarket gauges if I'm not mistaken.http://www.amazon.com/Koso-BA015B15-RX-2N-Style-Multifunction/dp/B00A3VO55M
Does this have a good engine?
Quote from: rich3389 on April 01, 2016, 09:21:39 AM
Does this have a good engine?
Yes, but something may need adjusting inside. Or it could've just been the carburetors
It was running fine until I hit a bump on the way to work one morning. That threw something off, because shortly after that, it started acting up.
In short, I know it runs, just not how well. That's the reason I bought a twin bike, to create one good bike out of two.
I'm not looking to get rich off the sale of these parts, justMmm make me a fair offer and it's yours.
That goes for all the parts. I'm looking at eBay for estimates and I favor priority shipping from usps.
Sent from my LG-D851 using Tapatalk
Quote from: KayneArgand on April 01, 2016, 08:52:08 AM
Quote from: smberens on April 01, 2016, 05:51:14 AM
What brand or what kind of bike is the speedo from
it's a Koso RX-2N. Aftermarket gauges if I'm not mistaken.http://www.amazon.com/Koso-BA015B15-RX-2N-Style-Multifunction/dp/B00A3VO55M
Yes, it is this style, but a Chinese knockoff. If you're good with electrical, it should be no big deal. I have all the parts to make it work, but no time to mess with it.
Quote from: Smil3y on April 01, 2016, 12:13:01 PM
I'm not looking to get rich off the sale of these parts, justMmm make me a fair offer and it's yours.
That goes for all the parts. I'm looking at eBay for estimates and I favor priority shipping from usps.
Then how does $40 shipped to 98337 for the signal generator assembly sound? :D
Sounds good. :thumb:
:cheers: PM sent!
If the gas tank is still available I'll DEFINITELY take it.
Signal generator shipped. 👍
Sent from my LG-D851 using Tapatalk
Quote from: The Buddha on March 29, 2016, 04:04:08 PM
Carbs ????
Send me price.
Thanks.
Buddha.
$125 including shipping. (http://uploads.tapatalk-cdn.com/20160403/a66fb40507e0483806282915bb63ca03.jpg)(http://uploads.tapatalk-cdn.com/20160403/504c1511902441d97fcca4ef935c73a9.jpg)(http://uploads.tapatalk-cdn.com/20160403/2136470fa5e1b08ba07456a6cc2c8ccb.jpg)(http://uploads.tapatalk-cdn.com/20160403/1e7ca68bcf102d03d1069cd1262916ad.jpg)
Sent from my LG-D851 using Tapatalk
Quote from: KayneArgand on March 29, 2016, 08:45:32 PM
I need part of the tank. The petcock + Filter.
$30 including shipping ok?
Sent from my LG-D851 using Tapatalk
PMing you
Interested in the front rotor if it's available. shipping would be to 22032.
Hi,
Is the gas tank still available? Shipping would be 60661
Quote from: ditkadrivingaschoolbus on April 04, 2016, 01:29:41 PM
Hi,
Is the gas tank still available? Shipping would be 60661
Yes it is, PM me for arrangements
Am i being ignored on this thread for some reason? I want to give you money. Would Pming you an offer solicit a reply?
I am also interested in the gas tank
Quote from: TheGreenWeenie on April 04, 2016, 08:06:26 PM
Am i being ignored on this thread for some reason? I want to give you money. Would Pming you an offer solicit a reply?
No I have been hawking this thread daily. I thought I replied to everyone's requests, sorry sending pm now
Gas tank, filter and lock has been sold. Will ship asap thank you
Sent from my LG-D851 using Tapatalk
Quote from: Smil3y on April 03, 2016, 11:47:31 AM
Signal generator shipped. 👍
Arrived today! If I didn't know better I'd guess this was delivered from a retail store. Very well packaged and the part looks great. Cheers to a top notch seller! :cheers:
Quote from: DesertFox on April 07, 2016, 09:43:38 AM
Quote from: Smil3y on April 03, 2016, 11:47:31 AM
Signal generator shipped. 👍
Arrived today! If I didn't know better I'd guess this was delivered from a retail store. Very well packaged and the part looks great. Cheers to a top notch seller! :cheers:
My pleasure :) 8)
Sent from my LG-D851 using Tapatalk
Do you still have the regulator/rectifier?
Is it in working condition?? :cheers: :cheers:
Quote from: gianzilla on April 07, 2016, 02:12:51 PM
Do you still have the regulator/rectifier?
Is it in working condition?? :cheers: :cheers:
Yes I still have that, as far as I know it should work fine.
Carburetors and also gas tank if not damaged to 98075 plz. Pics plz.
Quote from: hawaii808 on April 09, 2016, 07:24:23 PM
Carburetors and also gas tank if not damaged to 98075 plz. Pics plz.
Carbs are still available, but gas tank (dent and all) shipped this morning
I'm interested in the CDI box (the one on the left side of the battery box) and the coils. Zip 91381
Quote from: lucas on April 11, 2016, 11:56:37 AM
I'm interested in the CDI box (the one on the left side of the battery box) and the coils. Zip 91381
I still have that, just let me know. I'll pull it tomorrow and get it ready for shipping :wink:
Yeah, how much? Also if you can give me a price on the top triple clamp I'd appreciate that a lot :)
$40 for both parts shipped.
Mailman brought my bars, grips and switches today. Shipped really fast, thank you so much! :D
No problem, enjoy
Got the parts, thank you! Like everyone else is saying super fast delivery and the packaging is real good. :bowdown:
Quote from: lucas on April 23, 2016, 05:29:12 PM
Got the parts, thank you! Like everyone else is saying super fast delivery and the packaging is real good. :bowdown:
You're more than welcome my friend. :thumb:
There's still half a bike available, I'll post pix and eBay listing links soon.
My plan is to teardown the rest of the bike today and package everything so I can get exact weights on everything tomorrow at work. (they have a postage scale)
So here's what's left:
Airbox w/filter
Front fender
Turn signals
Mirrors
Rear grab handle
Tail light
Seat
Front wheel
Rear wheel
Center stand
(http://uploads.tapatalk-cdn.com/20160428/4a1e53f810d456dcd7271050b737da92.jpg)
(http://uploads.tapatalk-cdn.com/20160428/7f04357878e9c49dd8f202f5c2df1aff.jpg)
Sent from my LG-D851 using Tapatalk
Turn signals and mirrors - How much.
Cool.
Buddha.
$20 each,so $40 incl shipping :icon_mrgreen:
How much for the grab handle and front fender? Also would you include the screws as well?
$30 for both out the door, hardware included
How much for the seat to 98075?
Also, do you still have the magneto rotor? If so, how much shipped to 98075? Thanks.
I can do those for $40 including shipping. Let me check on the magneto rotor and make sure I still have it. Price will be the same either way.
Quote from: GSRiderDad on May 01, 2016, 11:06:25 PM
Also, do you still have the magneto rotor? If so, how much shipped to 98075? Thanks.
Forgive my ignorance, but what is this, and where do I find it? I could not locate it in my service manual.
My co-workers advised me that part is inside the motor. I'm selling the motor whole, so just the seat on this sale. 😒
Sent from my LG-D851 using Tapatalk
Bummer, that's the part I was most interested in. Thanks anyway though.
Hey do you have the front brake switch? I know it isn't listed above but I thought I'd ask cause my switch died stopped working today.
The switch is attached to the inside of the front brake lever and held on with a single screw. It has two electrical contacts coming out the side and a little clicky button.
You mean this?(http://uploads.tapatalk-cdn.com/20160505/388228c53c6f83bf842d8f5fd8fbe439.jpg)
Sent from my LG-D851 using Tapatalk
Yep :)
You bought the triple clamp stuff right? If so, I have your address and I'll just send this to you for free :cheers:
That's me! Thanks!! :cheers:
Would you be able to send me the fender bolts? Just realized that 3 rattled off and my forks are un-braced. hahaha :icon_eek:
Quote from: Hupjai on May 06, 2016, 09:31:21 AM
Would you be able to send me the fender bolts? Just realized that 3 rattled off and my forks are un-braced. hahaha :icon_eek:
They are M4 or M5 button head stainless bolts, see if your local Lowe's or hardware has some 1st and let me know, I'm kinda broke this week, bike insurance is going to drain me! :'(
Sent from my LG-D851 using Tapatalk
But it's not OEM!
Hahaha Thanks!
OEM is about $3 a bolt (don't even want to look at how much the washer and nut will run for) and Home depot sells them for $6 for 10 bolts.
I don't like having left over hardware. haha
Any chance I could buy a set off you?
Those were shipped with the original fender, sorry😕
Sent from my LG-D851 using Tapatalk
Quote from: Smil3y on April 28, 2016, 03:18:21 PM
$20 each,so $40 incl shipping :icon_mrgreen:
PM me your paypal ID please.
Or did you already and I lose it - 1 sec.
Cool.
Buddha.
Signals and mirrors still available, ready to ship 😉
Sent from my LG-D851 using Tapatalk
Would you happen to have a petcock?
Yes I do, $25 shipped and you'll have a petcock ;)
Got em over the weekend. Opened yesterday, installed mirrors. Whooo hooooo ....
Thanks man.
Cool.
Buddha.
Quote from: The Buddha on May 17, 2016, 05:47:05 AM
Got em over the weekend. Opened yesterday, installed mirrors. Whooo hooooo ....
Thanks man.
Cool.
Buddha.
Hope you like the little blind spot mirrors as much as I did. :thumb:
Cheers
What's left here? Sheesh. This thread is a feeding frenzy.
I still have half the dang bike left surprisingly enough wise guy! I'm trying to sell it on Craigslist with the finished bike.
Do you need something or just giving me a free bump? :D
I'm interested in turn signals, rear grab handle, and tachometer cable if the 96 had one. I might also need front master cylinder /reservoir, turn signal switch and turn signal relay not sure yet.
Looks like the tach cable, master cylinder and turn signal relay are all I have left of those items you're looking for.
I think I have 2 relays, you can have both
$50 sound ok?
Petcock is paid for! :2guns:
Shipped, no confirmation email?
Sent from my LG-D851 using Tapatalk
Just found the confirmation!
Thanks! :thumb:
Part came in today! :woohoo:
Bag smelled like fuel, smelled just right.
However, I had to pay the mail carrier. Pleasant fella. hahah
I shipped priority,they have a smell charge now? What's that all about? :dunno_black:
Do you know if these parts fit the 2001 gs500? If so, I'm looking for the gear-shifting lever assembly, and the seat if you still have them.
Quote from: scevil on May 29, 2016, 04:45:26 PM
Do you know if these parts fit the 2001 gs500? If so, I'm looking for the gear-shifting lever assembly, and the seat if you still have them.
Definitely have the seat, check fitment of the shift lever, looks like a simple set screw bolt-on
Sent from my LG-D851 using Tapatalk
Quote from: Smil3y on May 29, 2016, 06:08:09 AM
I shipped priority,they have a smell charge now? What's that all about? :dunno_black:
I asked my mail courier cousin. If the package doesn't meet the requirements for priority, it gets bumped up and either recipient pays or it gets sent back to shipper. Haha
Just sold the remaining portion of the bike, so everything is gone! Thank you everyone who inquired and especially those who purchased parts from this thread. I really appreciate it. :cheers:
Thank you for the bike bits and congrats on a successful part-out!!! :cheers:
Do you have the wiring harness for sale and will it work on a 1997
Nope, the entire bike has been sold. No more Suzukigs500's in my yard! :cheers: