Bike is in final stages and yet another problem! Petrol is getting into the float bowls but not the engine, I loosened bolt on bowl and it come out, my sparks are staying dry. Even on prime, it won't start, if I connect my tank to bottom 't' it wont start, but if I connect to top 't' and bottom 't' it runs so what's stopping it getting into engine? Thanks in advance p.s mixture screws are 2 1/2 turns out
What "T" is it supposed to be connected to?
Everything works as a system, and it doesn't take much to get the system screwed up. There's sso many possibilities as to why you're not getting fuel, it's tough to just rattle off every single one. What all have you done to the bike, and what still needs done?
It's vacuum based 92 model, bottom t connects to petcock which delivers the fuel to carbs, top t is the vacuum that also connects to petcock, got me stressed lol
Sent from my iPhone using Tapatalk
(http://uploads.tapatalk-cdn.com/20160512/4ff1a4edb653c7eef921031f15724704.jpg)(http://uploads.tapatalk-cdn.com/20160512/8c1305c8f5ee85e910b9b0721118055f.jpg)(http://uploads.tapatalk-cdn.com/20160512/40edca67c5527f50b2393c61ba932844.jpg)
Plans once I have it running, to replace brake lines, get a digital speedo, heel plates, paint engine etc...
Sent from my iPhone using Tapatalk
My mistake, vacuum runs to pipe on left carb on the inside
Sent from my iPhone using Tapatalk
Top T is vent hose that opens behind air box.
(http://wiki.gstwins.com/uploads/Main/hoserouting.jpg)
Fixed, after weeks of stripping carbs, had vacuum hose on wrong nozzle 😂 can't believe it, time to sort me chaos of wires out now, thanks for all help
Sent from my iPhone using Tapatalk