Everything but the frame for sale!
New wiring harness
new matched key set
new gauge cluster seals
TANK SOLD, SEAT SOLD, CARBS SOLD, FRONT CALIPER SOLD, TACH LINE SOLD
Engine available, rear swing-arm available, rims available, headlight assembly available, gauge cluster available, forks available, triple tree clamps available, full lock/key set available, rear caliper and hardware available, controls available, other minor parts available - ask if you have questions!
All reasonable offers will be considered!
(Price plus Shipping)
Dibs on the gas tank!
I'd be interested in a few items:
Carbs
Headlamp and hardware to attach to forks
Seat
Could I get prices for all three or individually?
Thanks!
Hi there,
Do you still have the stock rear shock?
Is it in good shape?
I'm interested.
Zip 17520 in PA.
Thanks,
Trwhouse
Quote from: Trwhouse on July 06, 2016, 07:21:13 PM
Hi there,
Do you still have the stock rear shock?
Is it in good shape?
I'm interested.
Zip 17520 in PA.
Thanks,
Trwhouse
I think it may be worn out. I don't know for certain, but the suspension seems rather spongy. . .
where would you be sending from parts from mate?
Quote from: robr31driver on July 06, 2016, 08:11:31 PM
where would you be sending from parts from mate?
Zip code 33592
ah im guessing USA? im in Australia, postage will be a killer, ah well! :thumb:
Quote from: robr31driver on July 06, 2016, 10:17:25 PM
ah im guessing USA? im in Australia, postage will be a killer, ah well! :thumb:
Depends on what you want. Some items could get expensive very quickly, but others may not be too bad. Send me a message on what you're interested in, and we'll see! :thumb:
I am interested in the headlamp and associated hardware if Hupajai backs out. Also would the plastic under the rear seat fit on a 2007 gs500f? If so I would be interested in it to. I just picked up a bike from a kid who did not treat it to kindly. Every piece of plastic is broken! I plan to pull the fairing and make it naked. I doubt you would part with them since you likely want to sell the whole engine, but I would be interested in the clutch cover and the engine cover on the other side of the bike. Also if the chain and sprockets are in fairly new condition (less than 1k) I would be interested in those too. I am new to the GS500 world so if none of these parts off your 95 will fit my 2007 then please let me know.
Thanks,
Ken
Quote from: Kenner on July 08, 2016, 12:31:42 PM
I am interested in the headlamp and associated hardware if Hupajai backs out. Also would the plastic under the rear seat fit on a 2007 gs500f? If so I would be interested in it to. I just picked up a bike from a kid who did not treat it to kindly. Every piece of plastic is broken! I plan to pull the fairing and make it naked. I doubt you would part with them since you likely want to sell the whole engine, but I would be interested in the clutch cover and the engine cover on the other side of the bike. Also if the chain and sprockets are in fairly new condition (less than 1k) I would be interested in those too. I am new to the GS500 world so if none of these parts off your 95 will fit my 2007 then please let me know.
Thanks,
Ken
I don't think any of the 95 parts will fit on the 07, but others can chime in on that. The engine in its entirety is spoken for, so sorry I can't help you there. . . Hupjai still has tentative dibs on the headlight assembly, but if he backs out, I'll let you know. . .
Quote from: Daeouse on July 08, 2016, 01:01:50 PM
Quote from: Kenner on July 08, 2016, 12:31:42 PM
I am interested in the headlamp and associated hardware if Hupajai backs out. Also would the plastic under the rear seat fit on a 2007 gs500f? If so I would be interested in it to. I just picked up a bike from a kid who did not treat it to kindly. Every piece of plastic is broken! I plan to pull the fairing and make it naked. I doubt you would part with them since you likely want to sell the whole engine, but I would be interested in the clutch cover and the engine cover on the other side of the bike. Also if the chain and sprockets are in fairly new condition (less than 1k) I would be interested in those too. I am new to the GS500 world so if none of these parts off your 95 will fit my 2007 then please let me know.
Thanks,
Ken
I don't think any of the 95 parts will fit on the 07, but others can chime in on that. The engine in its entirety is spoken for, so sorry I can't help you there. . . Hupjai still has tentative dibs on the headlight assembly, but if he backs out, I'll let you know. . .
I'm the one buying the engine. Once I do my engine swap, I'll contact Kenner if my original engine is unsalvageable and sell him the engine covers.
Plenty of parts still available!
I bailed on the headlamp! :bowdown:
Needy McGee, payment sent! :cheers:
Quote from: Hupjai on July 13, 2016, 11:18:05 AM
Needy McGee, payment sent! :cheers:
LOL!!!
:cheers: :cool:
Quote from: Matty206 on July 05, 2016, 07:33:55 PM
Dibs on the gas tank!
Damn! If Matty drops out on that tank I want the second look!
Quote from: lefty1615 on July 15, 2016, 10:10:33 AM
Quote from: Matty206 on July 05, 2016, 07:33:55 PM
Dibs on the gas tank!
Damn! If Matty drops out on that tank I want the second look!
Sorry, man. The tank is gone already. If you need anything else, let me know, I'll see what I can do.
Rims, rear brake caliper, rotors, forks, handlebars, wiring harness, chain, headlight, and many other parts still available!
What kind of condition is your front rotor in? Any grooves or warping?
Quote from: Matty206 on July 17, 2016, 02:49:50 PM
What kind of condition is your front rotor in? Any grooves or warping?
Its in fair condition. My mechanic friend says it should be fine for a while. Light surface wear. I can get pics if needed. . .
Daeouse,
Not sure if my PM was sent, I got yours. I am still interested in the headlight, mounting hardware, and front blinkers shipped to 84302. PM me with a price.
Kenner
Quote from: KayneArgand on July 09, 2016, 06:36:51 AM
Quote from: Daeouse on July 08, 2016, 01:01:50 PM
Quote from: Kenner on July 08, 2016, 12:31:42 PM
I am interested in the headlamp and associated hardware if Hupajai backs out. Also would the plastic under the rear seat fit on a 2007 gs500f? If so I would be interested in it to. I just picked up a bike from a kid who did not treat it to kindly. Every piece of plastic is broken! I plan to pull the fairing and make it naked. I doubt you would part with them since you likely want to sell the whole engine, but I would be interested in the clutch cover and the engine cover on the other side of the bike. Also if the chain and sprockets are in fairly new condition (less than 1k) I would be interested in those too. I am new to the GS500 world so if none of these parts off your 95 will fit my 2007 then please let me know.
Thanks,
Ken
I don't think any of the 95 parts will fit on the 07, but others can chime in on that. The engine in its entirety is spoken for, so sorry I can't help you there. . . Hupjai still has tentative dibs on the headlight assembly, but if he backs out, I'll let you know. . .
I'm the one buying the engine. Once I do my engine swap, I'll contact Kenner if my original engine is unsalvageable and sell him the engine covers.
KayneArgand,
Definitely hit me up if you'll sell them. Mine are all scraped up. Fortunately they are not cracked/leaking.
Ken
THAT'S WHAT I FORGOT TOBASK YOU ABOUT, FORKS! :technical:
Quote from: Hupjai on July 20, 2016, 06:53:21 PM
THAT'S WHAT I FORGOT TOBASK YOU ABOUT, FORKS! :technical:
Still available. . . :icon_mrgreen: :thumb:
How much for engine ...? .. to 33325 FL orida
Quote from: lowfly on July 23, 2016, 03:07:32 AM
How much for engine ...? .. to 33325 FL orida
Sorry, man, its already sold. Other parts are still available. . .
How much for the ' round' cover which says Suzuki on the throttle side:
[img=https://s31.postimg.org/r0wd6is4n/GS500_Cover.jpg] (https://postimg.org/image/r0wd6is4n/)
With shipping to 20109 and I have highlighted in Red. Thanks
Sorry, man. Engine has been sold.
If you have anything else you'd like, let me know.
Engine Available. :cool:
You are a persistent person.
How much for the forks? :bowdown:
Quote from: Hupjai on August 01, 2016, 03:48:40 PM
You are a persistent person.
How much for the forks? :bowdown:
I am indeed. :icon_mrgreen:
Make me an offer, good sir! :cool:
Quote from: Daeouse on August 01, 2016, 05:37:58 AM
Engine Available. :cool:
Would you just sell that black cover?
Quote from: maverickfhs on August 01, 2016, 07:30:08 PM
Quote from: Daeouse on August 01, 2016, 05:37:58 AM
Engine Available. :cool:
Would you just sell that black cover?
It doesn't have the sticker on it, just so you know. . .
How much without the sticker and can you please send me a pict of it?
Thanks
Quote from: maverickfhs on August 01, 2016, 07:33:03 PM
How much without the sticker and can you please send me a pict of it?
Thanks
I'd really prefer to sell the engine as a whole. . . :icon_neutral:
I really can't justify keeping this thing around for much longer. . . so parting out the engine for individual parts is a less appealing, as then I have to try to sell the remaining bits as quickly as possible. . .
Makes perfect sense and good luck man :)
Quote from: maverickfhs on August 01, 2016, 07:40:01 PM
Makes perfect sense and good luck man :)
Sorry, man.
Check Partzilla here: http://www.partzilla.com/parts/search/Suzuki/Motorcycle/1995/GS500E/parts.html (http://www.partzilla.com/parts/search/Suzuki/Motorcycle/1995/GS500E/parts.html)
YGPM :thumb:
I have a non-stock gas cap that doesn't lock. I'm interested in the full lock set, with shipping to 19803.
Thanks.
YGNMP :)
YGNPM
You've Got a New Private Message :cheers:
Quote from: lowfly on August 03, 2016, 12:35:46 PM
YGNPM
You've Got a New Private Message :cheers:
Ah! LOL! :icon_lol:
Do you still have the gauge cluster, tach cable, and master cylinder with brake lever?
Quote from: wakeNbake on August 08, 2016, 07:26:57 PM
Do you still have the gauge cluster, tach cable, and master cylinder with brake lever?
:cool:
Plenty of parts still available!
Rims still available, swing-arm available, forks available!
If you need it, I might still have it!
PM'd
Sent from my iPhone using Tapatalk
I'm gonna PM you!
You don't happen to have a magnet rotor do you? I have an 89 gs500e and having a hard time finding one. I live in central NC and can pay with pay pal
Do you have the clamp risers by any chance?
ygpm
sending PM
THREAD CLOSED