I am parting out this bike. I bought it for a good price and have done some work to it so It will run but not smoothly. I just don't have the time to dedicate to it and I already have 2 bikes that run perfectly. Just trying to get my money back on this one. All the electrical works except the oil light but I think that's due to a blown bulb. I did rebuild the carbs with K&N kits but I am sure they could use another good cleaning. The gas tank I found on ebay, it came off a 2009. There is one dent in it but no rust at all. It only has 4000 miles on it but sadly the previous owner left it outside in the weather for too long. The last registration is 2010
If there is anything you want I'm sure we can work out a fair price + shipping. It may take me a day or two to ship at first because I will be taking the bike apart as I go. Thanks!
Sold so far:
Seat
Hand controls
Gauge cluster
I can email pictures to anyone. I tried uploading them here but it keeps saying to try later because the upload folder is full???
I'll buy the hand controlls and guage clust and starter cylinoid. Let me now how much plus shipp
Quote from: jjmaine on July 18, 2016, 10:26:55 AM
I can email pictures to anyone. I tried uploading them here but it keeps saying to try later because the upload folder is full???
As always, you must host pictures on a different site like imgur or photobucket, then post the link here.
Kidzuki, pm me your email and I can send you pics of everything. I'd rather you see it first to be sure you want everything because the guage cluster has a crack in it. What exactly do you mean by hand controls?
Nevermind, I know what you mean now... How about $45 shipped for both side hand controls, gauge cluster and starter relay? The cluster has a crack on the right side black plastic, not on the face of the gauge.
I will try to upload pictures to a different site so I can add them here, never tried it before but it cant be that hard...
http://s58.photobucket.com/user/jjmaine/media/IMAG0492_zpspjx5nhvv.jpg.html
http://s58.photobucket.com/user/jjmaine/media/IMAG0493_zps2x25rg6b.jpg.html?sort=3&o=0
I'm interested in the seat. Pm sent
Rob
How much for engine ? ... to 33325 Florida
I think you may be better off finding an engine closer to home? Sorry I just wouldnt know how to begin trying to ship an entire engine and the shipping would probably be outrageous.
EDIT: NEVERMIND
Quote from: jjmaine on July 23, 2016, 07:55:29 AM
I think you may be better off finding an engine closer to home? Sorry I just wouldnt know how to begin trying to ship an entire engine and the shipping would probably be outrageous.
I think , USPS ground , shipping between 80 - 120$ to 33325 , no problem .
Example shipping image
but with more small wooden base (http://www.enginepalletcourierdeliveryservice.co.uk/gfx/engine9.jpeg)
But how much for engine ?
Thanks
jjmaine,
Please check your PM.
How much for the ' round' cover which says Suzuki on the throttle side:
(https://s31.postimg.org/r0wd6is4n/GS500_Cover.jpg) (https://postimg.org/image/r0wd6is4n/)
With shipping to 20109 and I have highlighted in Red. Thanks
check your pm.
Never received a PM. Please try again?
Do you still have the gauge cluster, tach cable, and master cylinder with brake lever?
:technical:
What's your offer for a set of forks sent to 95132? :whisper:
How do the carbs look? Any damage?
PM'd
Sent from my iPhone using Tapatalk
i know this has been on for a while. but do you still have the fuel tank. zip is 83647