GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: renklaf on September 21, 2016, 01:21:12 PM

Title: Putting my carb back in
Post by: renklaf on September 21, 2016, 01:21:12 PM
Howdy, I have a 2007 gs500f and I am re installing my carbs. I am almost done but I can not remember where this line goes.

Little help please?

https://drive.google.com/open?id=0B2G96y5egqy_aHdVbDhrX1RLTE0

https://drive.google.com/open?id=0B2G96y5egqy_MEc4R0N2d241Qms

sorry for some reason it wont let me upload a file
Title: Re: Putting my carb back in
Post by: rscottlow on September 22, 2016, 06:16:53 AM
Here's a good diagram that someone posted on another thread.

https://www.flickr.com/photos/63425569@N04/5788595416/


Sent from my iPhone using Tapatalk
Title: Re: Putting my carb back in
Post by: Watcher on September 22, 2016, 01:36:07 PM
This forum has long since run out of storage space for attachments.  In the future the best practice is to upload to a picture host like imageshack or photobucket and post the link here.  It'll embed the picture right into the post.


Not quite sure what I'm looking at, where does it connect to the carb?
If it's a lower line it's the fuel-in line and should connect to the petcock.  If it's an upper line it's the overflow and can go anywhere where itll point to the earth.
Title: Re: Putting my carb back in
Post by: gsJack on September 22, 2016, 03:18:04 PM
The line from the upper carb T is a vent hose and should be run over the air box and down between it and the battery where it is protected from high winds.

http://gstwins.com/gsboard/index.php?topic=68468.msg823836#msg823836