Print Page - Starter and headlight cut-out: electrical wiring

Title: Starter and headlight cut-out: electrical wiring
Post by: SFra on January 23, 2017, 08:21:01 PM

Hello,

I'm hoping to get some help troubleshooting a wiring issue that I've been having.

While riding my headlight can cut out and sometimes the bike wont start. If the headlight cuts out while riding, I can press the pass button (for high beams) and it will come back on. If I can't start the bike I've found hitting the headlight does the job.

Should I just take the headlight off and poke around for bad connections?

Thanks!

Title: Re: Starter and headlight cut-out: electrical wiring
Post by: Big Rich on January 23, 2017, 09:11:12 PM

Short answer: yes.

Long answer: most likely your problem is around the ignition switch and the associated wiring. Clean up all the connections in the headlight bucket and apply some dielectric grease. If the problem persists , let us know.

Title: Re: Starter and headlight cut-out: electrical wiring
Post by: SFra on January 23, 2017, 11:50:30 PM

Thanks! Will do.

Title: Re: Starter and headlight cut-out: electrical wiring
Post by: SFra on April 25, 2017, 06:16:17 PM

All fixed. It was a loose connection - took a while to find.

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: SFra on January 23, 2017, 08:21:01 PM