06 model,i want to hook up a vacuum ine from the rht intake boot to the petcock.
What else do i have to plug from the carbs. I need to make it simple, or doese anyone have an easy to read diagram??
Not sure if this will help you but these diagrams have sure assisted me in the past!
http://wiki.gstwins.com/index.php?n=Main.HoseRouting
Quote from: Ktm513 on February 16, 2019, 05:19:19 PM
06 model,i want to hook up a vacuum ine from the rht intake boot to the petcock.
What else do i have to plug from the carbs. I need to make it simple, or doese anyone have an easy to read diagram??
You could remove all the vacuum lines, use a removed T piece to plug the vacuum line to the carb. You can remove the solenoid at the bottom of the carbs. You can completely disconnect the white valves at the top of the carbs as they need vacuum to open. I just connected them together. Note: the air intake at the top with the foam filter on it is not connect as the valves are not operating.
http://gstwins.com/gsboard/index.php?topic=72140
(https://i.postimg.cc/j5RgFRFG/after-2.jpg)