GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: BikerBoy on April 20, 2019, 04:38:16 PM

Title: Where do these 2 vacuum lines go please
Post by: BikerBoy on April 20, 2019, 04:38:16 PM
OK re-assembling my bike after re-jetting and cant remember where these damn vacuum lines go!

1. In red is where I believe the vacuum line on the petcock goes, but where the hell does the green-circled line go??

(https://i.imgur.com/yko6ZA7.jpg)

2.Black canister line goes to where please? (circled in green)

(https://i.imgur.com/fyQtsWC.jpg)

Thanks
Title: Re: Where do these 2 vacuum lines go please
Post by: BikerBoy on April 20, 2019, 08:15:46 PM
I found the port for the first picture, still need some help with where the black cannister hose goes!
Title: Re: Where do these 2 vacuum lines go please
Post by: bogdan.laurentiu on April 20, 2019, 08:32:58 PM
Hope this helps
Title: Re: Where do these 2 vacuum lines go please
Post by: BikerBoy on May 06, 2019, 02:39:03 PM
Quote from: bogdan.laurentiu on April 20, 2019, 08:32:58 PM
Hope this helps
Thanks for the picture. Its hard to see where the charcoal line goes though, but I dont think it matters too much - all the vaccuum lines connected to the petcock/carb go somewhere, I left the charcoal canister line dangling and the bike seemed to run well yesterday, so all is good (for now lol)
Title: Re: Where do these 2 vacuum lines go please
Post by: BikerBoy on May 15, 2019, 01:59:29 PM
I found where this line goes, you have to take the carb out to get any decent view of it.

(https://i.imgur.com/Mc3f3K2.jpg)