I want a carb rebuild kit that's fairly priced, and makes the job easy and has all the rubber.
I think I will be 're-jetting' anyways, so don't care about jets being included.
What are the top recommendations for kits?
My bike has been sitting for about 2 years, so I want to fully clean and rebuild.
Best way to clean carbs is with an ultrasonic cleaner..........but no one ever seems to recommend the process except me :dunno_black:
Example.......https://www.harpers-ultrasonic.com/ (https://www.harpers-ultrasonic.com/)
Quote from: sledge on January 18, 2021, 09:45:26 AM
Best way to clean carbs is with an ultrasonic cleaner..........but no one ever seems to recommend the process except me :dunno_black:
Example.......https://www.harpers-ultrasonic.com/ (https://www.harpers-ultrasonic.com/)
Sure bud, ultrasonic is the way to go. I was asking about rebuild kits. Like the ones that come with all the gaskets you need to re-do the carb after the cleaning.
I have bought a few of these kits from this supplier and I have nothing to complain about....... but I am not in the USA :dunno_black:
https://nrp-carbs.co.uk/shop/index.php?route=product/product&product_id=4665 (https://nrp-carbs.co.uk/shop/index.php?route=product/product&product_id=4665)
If you are going to rebuild a carb it males sense to replace ALL the serviceable parts.......not just the ones you can see and get to!!
Just stick with a reputable name from a reputable source and you wont go wrong.
Quote from: struckjm on January 18, 2021, 07:25:59 AM
I want a carb rebuild kit that's fairly priced, and makes the job easy and has all the rubber.
I think I will be 're-jetting' anyways, so don't care about jets being included.
What are the top recommendations for kits?
My bike has been sitting for about 2 years, so I want to fully clean and rebuild.
These kit are good and inexpensive. Ship quickly from USA. (Not everything from this seller ships from is USA, but the GS kits do)
It comes with lots of parts and seals.
It has all the rubber seals except the o-ring on the plastic float holder. I matched those up at the hardware store.
It doesn't include the o-rings for the fuel inlet Tee, but I never see that in a carb kit.
https://www.ebay.com/itm/2X-Carburetor-carb-Repair-Rebuild-Kit-1989-2000-GS500-GS-500-GS500E-US/323338869308?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Post to complete some references not yet provided on this thread.
GS500 1989-1996 (year split to be confirmed by purchaser):
https://litetek.co/Carb_Kit_Suzuki_GS500_89-96.html
GS500 1997-2006 (year split to be confirmed by purchaser):
https://litetek.co/Carb_Kit_Suzuki_GS500_97-06.html
*Note there are PDF files of the service and owners manual at the bottom of each link. Additionally Litetek shows where their part no.'s supersede Suzuki part no.'s.
**shipping is free when you buy the full kit
Carb differences are discussed here for reference:
http://www.factorypro.com/Prod_Pages/prods10.html
http://www.factorypro.com/Prod_Pages/prods11.html