Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: The Buddha on March 23, 2004, 12:47:21 PM

Title: Handlebar pics...
Post by: The Buddha on March 23, 2004, 12:47:21 PM
Handlebar pics... while making them... and breaking them. Sorry ... no one told me better when I asked for wehre to host them.

http://www.imagestation.com/album/?id=4287360331

Cool.
Srianth.
Title: In photo bucket...
Post by: The Buddha on March 23, 2004, 01:21:36 PM
OK here it is in photobucket.
http://img40.photobucket.com/albums/v122/Seshadri_srinath/?

Cool.
Srinath.
Title: Handlebar pics...
Post by: Kerry on March 23, 2004, 02:42:42 PM
Quote* This album is password protected
Care to share the password?  :roll:
Title: Handlebar pics...
Post by: TheGoodGuy on March 23, 2004, 02:43:14 PM
Quote from: Kerry
Quote* This album is password protected
Care to share the password?  :roll:


ya ..

by the way try out www.fox302.com
Title: Handlebar pics...
Post by: mwdbruno on March 23, 2004, 03:06:42 PM
OOps...sorry for providing the bum site seshadri...
Title: Here is some
Post by: The Buddha on March 23, 2004, 05:36:24 PM
http://fox302.com/index.pl?s=vg&user=srinath
Cool.
Srinath.
Title: OK 7 more...
Post by: The Buddha on March 23, 2004, 08:38:17 PM
OK i have 7 more pics I need to show ... that offtopic site isn't working. My account has not been activated in 4 hours.
Cool.
Srinath.
Title: Handlebar pics...
Post by: The Buddha on March 24, 2004, 07:58:38 AM
http://img40.photobucket.com/albums/v122/Seshadri_srinath/?
The album has been made public... Hopefully that has solved the problem... if not the password is GS500E  -  Case sensitive.
Cool.
Srinath.
Title: Please check it out...
Post by: The Buddha on March 24, 2004, 09:13:41 AM
Please check the pics out... the bar end pics especially... I had to sand off the powder coating on the bar end to fit it... The powder is varying thicknesses in different ones... and from make to make. So a little rough sanding will get it to fit inside the bar... didn't want to take out another 16th of the bar for that. The rubber portion of the bar end needs to be shaved as well... and I didn't show that... cos well shaving rubber is easier than anything.. or use some radiator hose in place of that rubber piece. I drilled the bars to 1/2 inch depth to a 11/16th diameter. a 3/4th would be the next size up and would have been too thin.
Cool.
Srinath.
Title: UPS says...
Post by: The Buddha on March 31, 2004, 11:12:49 AM
UPS says everyone I send it to has got it... Please confirm... Thanks.
Cool.
Srinath.
Title: Pics here...
Post by: The Buddha on April 08, 2004, 10:25:13 AM
OK Guys pictures of bars are here.
Cool.
Srinath.
Text only | Text with Images