Print Page - turn signal problem/ wiring diagram

Title: turn signal problem/ wiring diagram
Post by: rockadoo on April 04, 2004, 03:24:45 PM

Hi Folks,
I have a problem with my turn signals. Left side works fine , right side nothing happens when I hit the switch. Does anyone have a scan of the wiring diagram they could send me? Just out of curiosity there are two wires that lead to the turn indicator light. one is a light green the other is a black. What color is the common ground on these Suzi's. On my Honda it's always green. Any help greatly appreciated as I'm trying to get it road ready so my signifcant other can take her road test.

Title: turn signal problem/ wiring diagram
Post by: Leveller on April 04, 2004, 04:48:11 PM

http://www.gs500e.co.uk/wire.jpg

:cheers:

Lev

Title: turn signal/ harness...fixed it!
Post by: rockadoo on April 04, 2004, 08:53:20 PM

I got it!!, took the switch apart and there was a tiny piece of white plastic (broken) that was keeping the switch from traveling far enough to make contact. I cleaned the switch body out and lubed it , it works fine now. Thanks for the link to the wiring too. :thumb:

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: rockadoo on April 04, 2004, 03:24:45 PM