Print Page - Nobody could have done this better

Title: Nobody could have done this better
Post by: johncam4 on June 10, 2004, 08:06:06 PM

At least he used a wheel block
http://www.tsba.org/UBB/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=3;t=003883#000009[/img]

Title: Nobody could have done this better
Post by: Blueknyt on June 10, 2004, 10:47:33 PM

OK, :x whos been sneaking pictures of me working? :guns:

Title: Nobody could have done this better
Post by: dgyver on June 11, 2004, 05:36:48 AM

:o
here is the pic:
(http://www.linkline.com/personal/dibuo/Safety.jpg)

Title: Nobody could have done this better
Post by: raylarrabee on June 11, 2004, 05:58:58 AM

if he was strong enough to get the truck in that position, I'm not worried about his safety.

Title: Nobody could have done this better
Post by: Frost on June 11, 2004, 06:04:27 AM

can someone say....CRUNCH??? :o :o

Title: Nobody could have done this better
Post by: snapper on June 11, 2004, 08:18:20 AM

Way too funny!

Title: Nobody could have done this better
Post by: cozy on June 11, 2004, 08:19:33 AM

Ah, i love it when new wallpaper comes along....

Title: I am...
Post by: The Buddha on June 11, 2004, 08:46:07 AM

OK I am a 100lb weakling, only I weigh 230+... and I can easily get the truck into that position... with nothing but a $20 bottle jack and some concrete blocks. He did not lift it up with his bare hands... You know that right.
Cool.
Srinath.

Title: Nobody could have done this better
Post by: Von Vester on June 11, 2004, 08:57:04 AM

What do you wanna bet he's welding on an unpurged fuel tank too. Darwinian selection in progress.

Title: Nobody could have done this better
Post by: Blueknyt on June 11, 2004, 09:38:19 AM

nope, he is welding on the frame rail behind the tank, he tilted the truck to force the frame rails back together enough to weld.

Title: Nobody could have done this better
Post by: J-Lo on June 11, 2004, 12:27:50 PM

Did anyone else notice the list of bikes the people on that site had? I can barely afford my GS, let alone an RSV1000, an SV650, AND a DL1000. EEK.

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: johncam4 on June 10, 2004, 08:06:06 PM