GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: chinox22x on June 21, 2004, 05:39:56 PM

Title: Oil and Oil Filter
Post by: chinox22x on June 21, 2004, 05:39:56 PM
I have ridden my new gs500F hard for the last 60 miles, it is now at 120miles.  I had wanted to change the oil and the filter but I do not know what filter to buy.  Nothing in the manual indicates what it is.

1.  What oil to use? Brand? I know its 10w-40 non synthetic
2.  What oil filter to use to replace the stock? Brand and model?

I appreciate the help, sorry for the noobieness.   :dunno:

-Chino
Title: Oil and Oil Filter
Post by: Frost on June 21, 2004, 06:13:35 PM
I was recommanded to use Shell Rotella-T 15-40 oil...i think GSJack uses it and it was posted on a site that it's the best oil for air cooled bikes...
Title: Oil and Oil Filter
Post by: ScottWV on June 21, 2004, 06:24:58 PM
Filter would be a GS500 oil filter - check your dealer, and some car parts stores have them, I know Idiot Zo..., errr Auto Zone does.

Oil - I don't want to go there.  There are about 200 different opinions on this forum about oil.  Personally, I use 10w-40 synthetic for cages and it seems to work fine.
Title: Oil and Oil Filter
Post by: chinox22x on June 21, 2004, 06:47:56 PM
Quote from: ScottWVFilter would be a GS500 oil filter - check your dealer, and some car parts stores have them, I know Idiot Zo..., errr Auto Zone does.

Oil - I don't want to go there.  There are about 200 different opinions on this forum about oil.  Personally, I use 10w-40 synthetic for cages and it seems to work fine.

hmm..i thought u aren't suppose to use synthetic after 5k miles?  this is a new bike in the process of being broken in.
Title: Oil and Oil Filter
Post by: luke1645 on June 21, 2004, 09:47:49 PM
from what i have been able to pick up on the oil threads, my best guess would be not to use it before 5000 miles or whatever but NEVER use it in the first 600 miles. it is too slippery and doesnt let the parts wear like they need to. someone correce me if i am wrong.
Title: Oil and Oil Filter
Post by: chupacabrah on June 22, 2004, 04:20:42 AM
Quote from: luke1645from what i have been able to pick up on the oil threads, my best guess would be not to use it before 5000 miles or whatever but NEVER use it in the first 600 miles. it is too slippery and doesnt let the parts wear like they need to. someone correce me if i am wrong.

you're right, or something like that.

here's a link on oil -> http://www.yft.org/tex_vfr/tech/oil.htm

I use the mobil delvac.  the shell rotella t is supposed to be good, too.

juse use whatever you think you'll like, and what's cheap.   :thumb:
Title: Oil and Oil Filter
Post by: JLKasper on June 22, 2004, 05:12:58 AM
I wouldn't worry about changing the oil filter yet.  Modern engines are so well put together that there isn't enough crud to clog the filter after 120 miles.  For your piece of mind, you could drain it out and replace it, then replace it at your next change interval. :cheers:
Title: Oil and Oil Filter
Post by: mp183 on June 22, 2004, 10:04:46 AM
You should replace the oil filter after the first 600-800 miles.  This is to make sure that any metal shavings are cleared out.  Afterward just change at the recommended intervals.  I use Castrol GTX and it purrs like a kitten, 16,500 + miles so far.  I have a DL650 and am using the same oil.  The DL oil filter is supposed to be changed every third oil change, and get this, valves every 14,500 miles.