Author Topic: Ignition Advancer  (Read 5206 times)

Offline Phaedrus

  • Honorary Moderator
  • Trade Count: (0)
  • MotoGP Racer
  • ******
  • Posts: 2722
  • Karma: +4/-0
  • 8-20-1980 to 7-1-2006. Goodbye dear friend.
Ignition Advancer
« on: December 13, 2005, 09:34:52 PM »
For the GS500 FAQ - please read over and add what you can, point out grammar or technical mistakes, etc. Thanks :thumb:


Ignition advancement will increase power in the lower RPM's and more "usable power". There is such a thing as an ignition advancer by Vance and Hines for the GS500, but they no longer manufacture it. It is possible you can get a modified stock one by asking around on the forum, or you can attempt to do it yourself.

Here are some links that may be of assistance:

For the "Do It Yourself Timing Advance"

For those who are able to get an old Vance and Hines ignition advancer:

The information in the tutorials above were written for the GS500, not the GS500F. The 2004+ GS's have a slightly different ignition timing due to the rotor. According to GStwin member BK, the "do it yourself" option worked fine on his '04 GS500F. He followed the tutorial on his GS500F. It took him about 20 minutes and he and is satisfied with the results of the "DIY" timing advance.
Richard died in a motorcycle accident that was at no fault of his own.  We lost a good friend and good member of this board.  Though Rich may be gone, his legacy will live on here.

Photos from the June '06 Northeast GStwin Meet