Author Topic: GS500 Rear Huggers  (Read 90319 times)

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
GS500 Rear Huggers
« on: January 01, 2006, 06:07:14 PM »
GS500 REAR HUGGER

FIBREGLASS PAINTED VERSION
I'll do runs of 6, paid up front. So once there are six total, I'll make another run.
Will keep the request/paid list here:
1 - not spoken for
2 - not spoken for
3 - not spoken for
4 - not spoken for
5 - not spoken for
6 - not spoken for





GS500 rear hugger:

Well, it took a while, but i finally got the hugger made for my GS and it's available to the rest of you GS'ers out there.
I made this hugger originally for a stock 2004 gs500f, mounting onto the existing chaingaurd and brake torque bar, but should fit up to an '89, I dont believe the parts have changed much since then. There is 1cm clearance on either side of the tire, so you if you have a slightly bigger tire it shouldn't be a problem(I have a 140 on mine, fits no problem).


Comes as a fibreglass/epoxy version, painted black and is ready to install as is.  - $170 (Canadian Dollars) + shipping + (2.9% of the total(hugger+shipping) for paypal fees if paying by paypal)

Comes with install instructions and necessary hardware to mount it. Made for a very simple install, all you need is a drill, a 3/16 inch drill bit and a pop rivet tool.

Shipping options:

All prices are stated in Canadian Dollars

Within Canada:

$20 (4 days/tracking #)

USA:

Air: $22 (up to 2 weeks/no tracking #)

International:

Surface: $22 (6-8 weeks/no tracking #)
Air: $40 (2 weeks/no tracking #)

Payment by money order or paypal.
Email me or Private Message me for payment details.



/Jeff :thumb
« Last Edit: August 01, 2013, 12:50:24 PM by airbrush »
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline surlybruce

  • Trade Count: (0)
  • Formula Extreme Racer
  • ***
  • Posts: 177
  • Karma: +0/-0
GS500 Rear Huggers
« Reply #1 on: January 02, 2006, 03:50:19 PM »
Just want to say hey whats up! Installed the carbon hugger on the 05 and it fit perfect . Instructions and install hardware were 100 %.Worth every penny to me .EXCELLENT job . CHEERS !
05 / GS 500 F / BLACK - SILVER / FENDERECTOMY / BLACK WINDSCREEN / LP CARBON SHORT STALKS / PAINTED - DRILLED HEEL PLATES / IRIDIUM PLUGS / CARBON TANK PROTECTER / SHOCK #6  / FITCH FUEL CATALYST / AIRBRUSH CARBON HUGGER / PROGRESSIVE SPRINGS / V-STROM HANDGUARDS / 137.5-62.5- 20 RE - JET / ?????

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
GS500 Rear Huggers
« Reply #2 on: January 02, 2006, 11:38:54 PM »
Glad you liked it!

Here's the full side image again...as my original posting seems to have vanished somehow :dunno:

jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
Re: GS500 Rear Huggers
« Reply #3 on: March 06, 2006, 01:01:18 PM »
I have four more in production right now, but i will be gone for 2 months with work starting in april, so if you would like one for spring this will be your last chance until I am back in the summer.
I'm hoping to have them all done by the end of this weekend. Anyone interested in one, let me know.

Cheers.
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
Re: GS500 Rear Huggers
« Reply #4 on: March 09, 2006, 11:39:23 PM »
will be finishing these off over the weekend....three left
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
Re: GS500 Rear Huggers
« Reply #5 on: March 15, 2006, 05:47:46 PM »
Two weeks and two left before I am gone away for work for while. Anyone else would like one before i leave, let me know.
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline gtownsend

  • Trade Count: (0)
  • Local Club Racer
  • *
  • Posts: 30
  • Karma: +0/-0
Re: GS500 Rear Huggers
« Reply #6 on: April 02, 2006, 11:09:47 PM »
airbrush,
Do you still have any huggers left?  I just saw the post and hope I am not too late.  I have an '05.  I would really like to get one from you.  Please let me know something.

Thanks,
Gary :thumb:
2005 Suzuki GS 500F (Black/Silver/Red), K&N Filter, Dynojet (Stage 1), Flo-Commander, Zero-Gravity Sport Touring Windscreen, All Out Graphics "Rim-Tape", and an IXIL Exhaust.
2005 Suzuki Hayabusa GSX-1300R (Red/Black/Silver),No modifications (as of yet)

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
Re: GS500 Rear Huggers
« Reply #7 on: April 03, 2006, 04:21:41 PM »
I have 2 carbon fibre left, but I am out of the country on work for 2 months. Earliest I would be able to send one out would be around mid june when I am back.
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline gtownsend

  • Trade Count: (0)
  • Local Club Racer
  • *
  • Posts: 30
  • Karma: +0/-0
Re: GS500 Rear Huggers
« Reply #8 on: April 03, 2006, 08:11:28 PM »
That sounds good, will you have the primed ones around that time also or just the carbon fiber ones?  I will surely get one from you, just keep me in mind when you get back in country!

Thanks a million,
Gary :thumb:
2005 Suzuki GS 500F (Black/Silver/Red), K&N Filter, Dynojet (Stage 1), Flo-Commander, Zero-Gravity Sport Touring Windscreen, All Out Graphics "Rim-Tape", and an IXIL Exhaust.
2005 Suzuki Hayabusa GSX-1300R (Red/Black/Silver),No modifications (as of yet)

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
Re: GS500 Rear Huggers
« Reply #9 on: April 04, 2006, 11:02:20 AM »
no primed ones, just carbon fibre..don't plan on making any more for a while unless more people want some.
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline gtownsend

  • Trade Count: (0)
  • Local Club Racer
  • *
  • Posts: 30
  • Karma: +0/-0
Re: GS500 Rear Huggers
« Reply #10 on: April 05, 2006, 03:12:58 AM »
That sounds good to me.  Save me one of them and let me know when you get back in-country.  I will send you the money.  I have a 140/80 rear tire on the back of my bike, do you think it will work on it?  Can't wait to hear from you! :thumb:

Thanks again,
Gary
2005 Suzuki GS 500F (Black/Silver/Red), K&N Filter, Dynojet (Stage 1), Flo-Commander, Zero-Gravity Sport Touring Windscreen, All Out Graphics "Rim-Tape", and an IXIL Exhaust.
2005 Suzuki Hayabusa GSX-1300R (Red/Black/Silver),No modifications (as of yet)

Offline gtownsend

  • Trade Count: (0)
  • Local Club Racer
  • *
  • Posts: 30
  • Karma: +0/-0
Re: GS500 Rear Huggers
« Reply #11 on: April 05, 2006, 03:15:02 AM »
I forgot to ask you if you have any of the key chains left.  If you do, I'll take one of those too.

Gary :)
2005 Suzuki GS 500F (Black/Silver/Red), K&N Filter, Dynojet (Stage 1), Flo-Commander, Zero-Gravity Sport Touring Windscreen, All Out Graphics "Rim-Tape", and an IXIL Exhaust.
2005 Suzuki Hayabusa GSX-1300R (Red/Black/Silver),No modifications (as of yet)

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
Re: GS500 Rear Huggers
« Reply #12 on: April 05, 2006, 06:35:49 AM »
...yup, still have those. I'll let you know when i'm back.
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline Grainbelt

  • Trade Count: (0)
  • Formula Extreme Racer
  • ***
  • Posts: 254
  • Karma: +0/-0
Re: GS500 Rear Huggers
« Reply #13 on: May 26, 2006, 07:38:49 PM »
Would be all over a primed one, but I'd take a CF one if thats all you've got. I'm even in Canada. Wud appreciate a PM when you get back.

Thanks !
--Mike
Gone: '93 GS500  --  Street: '06 Ninja 650R --  Dirt: '08 DR650SE

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
Re: GS500 Rear Huggers
« Reply #14 on: May 27, 2006, 07:43:02 AM »
I have some carbon fibre left, will be first come first serve on those ones. Will be back around June 20th so i will let you know then. I have materials left to make a couple more I think and that will probably be it for the season. Don't plan on making anymore for a while after that.
I see you're in Saskatoon, i lived there too for 3 years...nice city. I grew up in Regina myself.
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline Mr Hyde

  • Trade Count: (+1)
  • AMA Supersport Racer
  • **
  • Posts: 53
  • Karma: +0/-0
Re: GS500 Rear Huggers
« Reply #15 on: May 28, 2006, 02:12:00 AM »
Where abouts in Ontario are you located ???  When you come back i would be interested in one.. and if its close enough to the K-W, Cambridge, Guelph... might just come down and pick it up..
Thanks
Mike
05' GS500 E to F conversion, sm2, progressive springs, 15t sprocket, Kat rear wheel. K&N, V&H pipe, jets, 110/150 rubber/ flushmount led's, zero gravity DB, and other things to tinker on

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
Re: GS500 Rear Huggers
« Reply #16 on: May 28, 2006, 03:29:15 PM »
I'm in London, probably gonna be cheaper just to send it out anyways...
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline Mr Hyde

  • Trade Count: (+1)
  • AMA Supersport Racer
  • **
  • Posts: 53
  • Karma: +0/-0
Re: GS500 Rear Huggers
« Reply #17 on: June 02, 2006, 02:14:50 PM »
OKAY.. Please let me know when you're back and  I'll get one from you...
Thanks,
Mike
05' GS500 E to F conversion, sm2, progressive springs, 15t sprocket, Kat rear wheel. K&N, V&H pipe, jets, 110/150 rubber/ flushmount led's, zero gravity DB, and other things to tinker on

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
Re: GS500 Rear Huggers
« Reply #18 on: June 02, 2006, 03:42:28 PM »
will do...should be back around june 20
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

Offline airbrush

  • Trade Count: (+7)
  • AMA Superbike Racer
  • ****
  • Posts: 473
  • Karma: +3/-0
    • http://www.custom-airbrush.com
Re: GS500 Rear Huggers
« Reply #19 on: June 19, 2006, 09:04:40 AM »
...i'm back. Have one carbon fibre left for now.
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com