Author Topic: 3D MODEL k&N Flux restrictor  (Read 112 times)

Offline Kito

  • Trade Count: (0)
  • AMA Supersport Racer
  • **
  • Posts: 141
  • Karma: +7/-0
  • slow and low!
3D MODEL k&N Flux restrictor
« on: November 01, 2018, 10:44:31 AM »
Many good folks advid=se me to go for the OEM air filter... but I went for the K&N for some reasons...

I received the filter yesterday.. and I saw that the flux restrictor fits not that tight... ( so I thought that would be nice to have the specs in case of losing the original one. I draw it in SolidWorks 2016, and exported in STL.. so anyone can 3dprint or do it on a lathe.

It is made of rubber.. but it would do fine on ABS or PLA

Keywords: restrictor, K&N, air filter, su-5589, 087018-1

SW:
https://drive.google.com/open?id=1k0WrhgboYYwFYTyByronbCludchb9hdg

STL:
https://drive.google.com/open?id=1f2UXWc3DdKu6U-4QCkIu7CDunUml6nBN
« Last Edit: November 01, 2018, 02:27:57 PM by Kito »
2004 Track/Street Rat .... or maybe just trash!
Reverse Gear Shifting (topic=72206.0)
Quick and Cheap Shifter (topic=72099.0)
Gear indicator (topic=72403.0)
Thumb Brake Loading (topic=72143.0)
Clipons

Offline Kito

  • Trade Count: (0)
  • AMA Supersport Racer
  • **
  • Posts: 141
  • Karma: +7/-0
  • slow and low!
Re: 3D MODEL k&N Flux restrictor
« Reply #1 on: November 01, 2018, 10:46:55 AM »
 :)

in millimeters
« Last Edit: November 01, 2018, 10:55:16 AM by Kito »
2004 Track/Street Rat .... or maybe just trash!
Reverse Gear Shifting (topic=72206.0)
Quick and Cheap Shifter (topic=72099.0)
Gear indicator (topic=72403.0)
Thumb Brake Loading (topic=72143.0)
Clipons