fork rebuilding...

[pixelmonkey]

i'm in the process of replacing the oil, seals and wipers on the front of the 92.

my question is.... how do i get the tubes out of the lower leg? i'm used to seeing a large hex or allen bolt when tearing down dirt bikes, so this is throwing me a curve.

i have the springs out
the bolt at the bottom of the fork leg is loose, but i know it's attached to something.

tool i need is....

please help me out.

tearing down the rear for a while. i'll be back to check in a bit.
chris<pixelmonkey>

[pixelmonkey]

so in

14 screws into 13

how do i keep 13 from spinning when turning 14?

thanks!
chris<pixelmonkey>

[Mat]

i drop a 7/8 inch nut down the tube followed by a socket, many extensions and a ratchet so it won't spin and remove that bolt

[Kerry]

how do i keep 13 from spinning when turning 14?

See the Bad Day Wrenching on the GS thread for a few concrete ideas.

[pixelmonkey]

thank!

making another trip to lowes tomorrow!!!
chris<pixelmonkey>

[geekonabike]

Not riding in this wonderful Oklahoma weather?  --Mike D.

[Blueknyt]

gotta love Air tools, Blipblip with the Air Impact gun and thathathathats all folks.