Flanges and wiley co - available again

[The Buddha]

Flange is $40 and shipping made by yours truly ...
Wileyco is here - Ebay again but new seller.
http://search.ebay.com/search/search.dll?cgiurl=http%3A%2F%2Fcgi.ebay.com%2Fws%2F&fkr=1&from=R8&satitle=wileyco&category0=

I would suggest we pool our numbers and work in a group buy. Offer them less for each type and close the deal.

Tell me count for flanges immediately (in 1-2 days) and I'll make the end plates. Once that is done we wont be able to make any more. So order up. Now anyone who had a flange from before and its leaking or something let me know, and I'll swap it out. No not leaking cos you cut a hole in it. Anyway - order up.
Cool.
Srinath.

[scottpA_GS]

Ok who is gonna strike a better deal with the guy on ebay? I think like $90 shipped if we give hime like 5-10 orders... I dont know if he will work a deal though. But if someone wants to try ill pay $90 for one.

[The Buddha]

I could get that aspect rolling. Now it will be sorta mention Gstwin and you get this price ... I'd say 100 for Titanium and carbon and $75 for stainless what ya think. I suck at negotiating though, so may be someone else should. See he has said best offer, so your options are to offer less dont ya think.
Cool.
Srinath.

[budget speed demon]

what ever happened to the 3 point case guards with frame sliders?

[ImJustPondering]

I'll purchase two! (3 hole ones). $80.00 

- David

[The Buddha]

what ever happened to the 3 point case guards with frame sliders?

Yea yea yea ... comming. The way I look at it, this is a smaller ticket item. I hope to make these for people since the cans are there now, and I cannot make 1-2, a good 20 to be feasible really, so I'll get these started. The case guards will follow hopefully. Again I'd need numbers. Hopefully a good 60+ for those since bolts are boxes of 100's only, I have some 40 or so, will need closer to 70 really, the damn bolts cost me $700+ just the bolts.
Cool.
Srinath.

[mike_mike]

what do these famous flanges look like?
they'll work with the F models right?
can you give a quick blurb as to what is required to go from stock to a flange + bolt on?

[The Buddha]

what do these famous flanges look like?
they'll work with the F models right?
can you give a quick blurb as to what is required to go from stock to a flange + bolt on?

F yes, and they will look like a pipe and a plate welded up.
Blurb about fitting it ... OK cut the header and these slide on. When you get it you'll see - it will literally fit itself ...
Cool.
Srinath.

[kimo3825]

+1 depending on if bike is repairable or not. get back to you in 5 working days. Will they fit an 04 or 05 gsxr 600  can?

[Wrecent_Wryder]

&

[fibes7]

id get down on this deal, i like the carbon fiber can, id like some more info on these flanges though, maybe a pic
if someone has one put on, also we are talkin about the "SUZUKI RF 900 95-98 CARBON WILEYCO EXHAUST, NEW IN BOX!"
correct?

thanks
  shane

[nick_villan]

yo hey man i was wondering which exhasut should i chose or do your flanges come with one. how does it work. im sorry i dont understand bikes to much. im more of a car guy(sorry). thanks man ohh and ya wehn are they going to be on sale?

[The Buddha]

The 3 bolt cans all look like they will work. Any wileyco with 3 bolts is sure to work. Some have even slapped on D&D's or other 3 bolters. Just send me $$ and no need for any can BS. I just bought a can to do this on. Now they will fit all GS years 89-06. I can choke them if any one wanted to not rejet, and remove the choker when you rejet. I dont have the time to post the old stuff all again. Someone please put a link up. I am going to order 20 plates. Assuming I lose 3-4 (hope no more) we will have 16. Should be plenty I hope. OK so watch this space, typically you just need a saw blade (hack saw blade, jig saw, pipe cutter, chop saw, laser cutter, any of the above will work, ... ) and maybe muffler tape and maybe muffler clamp.
Now GSXR 600-750 what years ... man I have no idea, but 96-99 750 cans will work.
Cool.
Srinath.

[nick_villan]

yo count me in for one, know does the 100 price for the flange it self, or is it 40?

[nick_villan]

hey will a gsx 1000 work or not a chance?

[The Buddha]

$40 and shipping ... dont short change me on the shipping ...  ... Flange.
Now someone should take point on the exhausts and work out with that dude and finnagle the cans form them for a good $$$ ... If I remember it was $60 including shipping for cans from DK scratch and dent ... This clown wants 2 X - He prolly bought it from DK last year. OK maybe not, cos those were definitely scratched and/or dented. Anyway, no sense buying in number if you cant influence the price.
Cool.
Srinath.

[nick_villan]

ohh man i didnt mean no disripect. im just kind of stupid with this stuff man,im sorry my b. i heard that u do some amazing work especially from a guy named rick, he was the one who said ur were the best.

[nmred]

Definitely count me in.  I have an 93 "E", just in case that matters.

[snap]

Count me in. Which can should I get for the 92 gs500e?

[qjt18]

Count me in too