Cheap-Ass Fenderectomy

[pester]

Looks really good, nice work. 

That's similar to what I did, I have a '96 and had a hard time getting my signals up higher and the plate like you have it. It angles in towards the rear tire. So if your gs is an E model be prepared to do a little extra 'fabrication.' It's harder to do on an E than on an F.

i was wondering if any of you removed the fender completely and installed a piece of sheet metal
instead like an undertail, (stainless steel could do the trick)

so the whole fender goes bye bye and then install a plate bracket?

i had a kawi 750 and thats the way it was done

[MrDan]

Ill get the pics up ASAP. I used LP turn signals that mount to your tag bolts.

Whoa .. where'd you get those?

[pbureau69]

i was wondering if any of you removed the fender completely and installed a piece of sheet metal
instead like an undertail, (stainless steel could do the trick)
so the whole fender goes bye bye and then install a plate bracket?

I guess you could, but then the rear shock would get crap into it.. otherwize a fender eliminator kit doesnt exist (that I am aware) for the GS, but you could make one I guess...

[Jay_wolf]

i was wondering if any of you removed the fender completely and installed a piece of sheet metal
instead like an undertail, (stainless steel could do the trick)
so the whole fender goes bye bye and then install a plate bracket?

I guess you could, but then the rear shock would get crap into it.. otherwize a fender eliminator kit doesnt exist (that I am aware) for the GS, but you could make one I guess...

Then u get a bandit Rear Hugger. And Sorted