News:

Registration Issues: email manjul.bose at gmail for support - seems there is a issue that we're still trying to fix

Main Menu

Full bike part out!

Started by psychochild, June 05, 2007, 02:56:44 PM

Previous topic - Next topic

psychochild

So Im new here, I grabed a used GS500 that had been wrecked for pretty cheap,  and I think instead of fixing it up and selling it Im just going to part it out so heres what Ive got:

again the bike is a 2000 GS500 without the fairing (I dont know what model that is)

this bike had 3560 miles on it when wrecked!

Frame w/title, pretty bent in the rear, may be salvageable,  I know all the engine mounting points are strait, neck cup im not to sure about, rear section is pretty banged

forks are toast
bars, levers, gauges, front wheel and headlight are pretty messed up

tripple trees are in good condition, top and bottom with ignition switch,

I bought a new front rim with the intention of rebuilding the bike

front and rear callipers/disks are in great shape

rear wheel and tire

swingarm with shock and spring

seat is in great shape with no rips

tank is pretty beat up in the back, front half is good though

side pannels are scratched but deffinitly useable

signals

tail light

rear fender

foot pegs mounts and controls

miorrors are ok

anything else you can think of, if its from the neck cup back its probably in good shape


Engine Carbs and wiring harness im thinking about keeping for a different bike, but make me a good offer and there yours, all are in great shape

Im going to be putting all this stuff up on ebay in a few weeks if it dosent sell here, and I can garantee ill be charging more when I do.  If you need anything please email me!  Ill post up pictures soon, and by request fo specific parts.  Ill also be updating if I forgot any other parts.

scottpA_GS

I think that your turn signal realy will work for me.. I need to check at work tomorrow.. of so how about $10 shipped?

:cheers:

Let me know

Also.. How about the tank, seat and rear plastics? How much?

SCOTT


~ 1990 GS500E Project bike ~ Frame up restoration ~ Yosh exhaust, 89 clipons, ...more to come...

~ 98 Shadow ACE 750 ~ Black Straight Pipes ~ UNI Filter ~ Dyno Jet Stage 1 ~ Sissy Bar ~


bigburma

There seems to be another full bike part out on ebay right now too. Just type in Suzuki GS 500 and see what comes up. Supposedly only had 767 miles on it.
y'all come back now y'hear

mach1

what shape are the mirrirs? EX round, square.......
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

psychochild




Quote from: bigburma on June 05, 2007, 03:18:52 PM
There seems to be another full bike part out on ebay right now too. Just type in Suzuki GS 500 and see what comes up. Supposedly only had 767 miles on it.


thanks, I appriciate you deffering my buisness  :2guns:


The mirrors are in ok shape, a little surface rust on the threads, they are the square type.

psychochild

Quote from: scottpA_GS on June 05, 2007, 03:06:46 PM
I think that your turn signal realy will work for me.. I need to check at work tomorrow.. of so how about $10 shipped?

:cheers:

Let me know

Also.. How about the tank, seat and rear plastics? How much?

SCOTT

relay is yours for 10$+shipping if itll work for you,

tank seat and rear plastics, how about 80$ for it all (including the relay)+ shipping?  the tank would be without the filler cap if thats all right, 

amcline

i need the carbs if they are in good cond, will paypal asap i think i wold like them as complete as possible tho, im trying to get my bike running and just bought the intake boots then noticed the carbs are missing internal parts! so let me know asap what you need for the carbs setup, email me and well talk, imm pm my cell # so you can call if you want...
Matt
96 project GS500e  Ex-stunters bike now getting saved and hopfully restored.

mach1

how much for the mirrors shipped to california
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

scottpA_GS

#8
 :thumb:


~ 1990 GS500E Project bike ~ Frame up restoration ~ Yosh exhaust, 89 clipons, ...more to come...

~ 98 Shadow ACE 750 ~ Black Straight Pipes ~ UNI Filter ~ Dyno Jet Stage 1 ~ Sissy Bar ~


psychochild

#9
Quote from: scottpA_GS on June 05, 2007, 04:59:13 PM


$80 + Shipping... SOLD  :thumb:

PM sent!

not sold!  still availible!  :icon_mrgreen:

ben2go

what are you wanting for the engine?condition?I don't need carbs,I do need the electrics that are on/in the engine.I'm located in SC zip 29349 shipping quote if you can
PICS are GONE never TO return.

frankieG

Quote from: bigburma on June 05, 2007, 03:18:52 PM
There seems to be another full bike part out on ebay right now too. Just type in Suzuki GS 500 and see what comes up. Supposedly only had 767 miles on it.
that one has been on there a couple of week.  the guy parting it has the items down to bolts and heads....result?  too much money
liberal camerican
living in beautiful new port richey florida
i have a beautiful gf(not anymore)
former navy bubble head (JD is our patran saint)

coll0412

So you are keeping the motor, or selling the motor I am confused
CRA #220

psychochild

Quote from: coll0412 on June 06, 2007, 03:46:10 PM
So you are keeping the motor, or selling the motor I am confused

Ill sell it for a fair price, since its in such good shape, but the rest of the bike I just want gone, so Im trying to keep prices pretty low

frankieG

would you please e-mail me pics of the tank if it is not taken?

frank.l.gallagher@hotmail.com

frankie
liberal camerican
living in beautiful new port richey florida
i have a beautiful gf(not anymore)
former navy bubble head (JD is our patran saint)

salad

yeah... i'd like to see pics of the bike too, please.

psychochild

Ill have some pics up by the end of today for sure guys!  :icon_mrgreen:

jp

#17
I could use the left rear wheel spacer, the petcock, and the tripmeter knob & screw off the gauges (if they survived the crash).

psychochild

spacer I can do but both petcocks are already spoken for

Carbs are now gone as well.

jp

What do you want for the spacer?

SMF spam blocked by CleanTalk