News:

Need a manual?  Buy a Clymer manual Here

Main Menu

Tip air filter housing

Started by Bobbleboy, July 03, 2007, 06:43:28 PM

Previous topic - Next topic

Bobbleboy

Tip air filter housing

Took me 30 min, to connect the air filter housing, first time to the carburators

last ten times or more  :2guns:, remove the air filter, put hour hand inside the air filter housing, use one finger to push the rubber out, almost draw a circle , with your finger against the carburator, takes 1 min that way.

Had a problem, every time the bike was on choke, one cylinder was acting up, knocking loud, at least a year, i had this problem, couldnt find the problem, then by luck yesterday, i saw that there is a hole in the side of the float assembly, and sure enough, it was blockt, made my day, hate those carbs now  :mad:

André S Hansen
Denmark

NiceGuysFinishLast

also helps if you lube the rubber boots with a little motor or vegetable oil
irc.freequest.net

#GStwins gs500

Hang out there, we may flame, but we don't hate.

My attitude is in serious need of readjustment, and I'm ok with that.

SMF spam blocked by CleanTalk