Lowering the front end

[facepants]

How would handling be affected by lowering only the front end of the bike (by sliding the fork tubes higher up through the triples)?  What other problems, besides handling, might one encounter after making this modification?

[Jay_wolf]

well it  changes the rake ,and mine are higher up ,for my clip ones ,and i noticed a huge amount of difference for the better , altho , i had swopped for a kat front end ,
try it out , in diferent methods , just remember do retorque the bolts !

[facepants]

How exactly was handling different compared to the stock position of the forks in the triples?

[Jay_wolf]

Feel tighter , felt like icould get to then ends of the tires better, overall tighter and more responsive

[scratch]

It becomes twitchier, has quicker turn-in.

The only other problem you may encounter is bubbling of the paint on the back of the front fender, from the heat of the headers (but, increasing your preload, which raises your front end, would compensate).

Lastly, would be a reduction in ground clearance, which is, so far, a very minor concern because this bike already has so much ground clearance.

[ben2go]

I noticed no difference.Mine are raised 1 and 1/4 inch higher.