rear wheel swap for the friggin crazy....

[werase643]

anybody want a 2006 GSXR1000 K6 complete rear wheel assy
swingarm axle to the tar
everything except the master cylinder....i might have one also...have to look

this is complete black swingarm/shock/linkage/black wheel/black tar/axles/caliper/rotor/cush/sprocket ..... everything!!!!!!
unbolted from the frame back
$350 + what ever it takes to ship

located in central  NC

[The Buddha]

There was a dealer in charlotte (off freedom drive) where I'd stop by often and usually every sentence will end with "fitted on to a GS 500".
Example: Ooooo ... this can be machined and cut and welded here and ground and trimmed there and quartered and iced and julienned and ... fitted onto a GS500.
This sounds like one of those projects.
GS500 trike anyone ??
Cool.
Srinath.

[average]

Ken, this isn't bolting up is it?  I'll have to get up with you guys soon. Sri, you coming back this way anytime soon?

[The Buddha]

Diaz - I dont believe I'd come there if I am employed ...  ... too far.
Now I may move back if I get fired and dont find some other job in this area. Maybe ...
Ken - I have some machining to do for a crazy ass 2 into 1 intake for the virago. I'll PM ya ken.
Cool.
Srinath.

[octane]

Hey Ken and Srinath, what's shakin'?! Long time no see. Been busy. Hopefully make it to VIR sometime this spring...drop me a line if you'r heading out there!

[werase643]

the bike is hanging from the back deck with the frame broke in two

I have not measured a dang thing

just threw it out to see if it would stick on the wall.....like Srinaths' underoos

engine looks good except the throttle bodies are pretty beat up

I wonder if it will bolt into a 600 frame....?

[spc]

Sounds like a fun sleeper project, as long as you put 600 plastics back on it

[ssinema]

the GSXR 1000 motor will bolt into a 750 frame with no problems. seems it shouldnt be too difficult to put in a 600 frame. sounds like fun trying!!   

[spc]

I know all the old SRAD motors are swappable, that's why I'm half keeping an eye out for a 750 engine

[octane]

I apologize in advance for hijacking your thread, Ken - but I don't think you'll mind. I'll edit/delete if it rubs ya the wrong way (like the pavement at VIR!)

I've got a brand new, in the crate from Yamaha, zero mile, never been installed in a bike Yamaha FZ-1 motor in my shop. Bought it for a half baked project I now have no time for. 1,500 bucks if anyone is interested. It's complete with carbs and everything. I also have a complete, brand new, still in the plastic wiring harness, airbox, and everything else to make it run that I'll send out the door for an additional 200 bucks.

[albertinhouston]

not all motors are bolt on for a srad. the 750 96-99 is a direct bolt on. The 98-99 need the FI tank from what i've read.  I have a 97 750 motor in my 91 bandit 400. now thats a sleeper.  there were so few of my bikes made that know one knows what the motor should look like. I'm killing people on roll-ons.
the 2k+ needs some brackets made.

I will have an extra 750 motor (complete with everything) in about a week or two.  I was building another 400 bandit w/750 but I bought a dr650 motor instead. just let me know.
albert

[octane]

not all motors are bolt on for a srad. the 750 96-99 is a direct bolt on. The 98-99 need the FI tank from what i've read.  I have a 97 750 motor in my 91 bandit 400. now thats a sleeper.  there were so few of my bikes made that know one knows what the motor should look like. I'm killing people on roll-ons.
the 2k+ needs some brackets made.

I will have an extra 750 motor (complete with everything) in about a week or two.  I was building another 400 bandit w/750 but I bought a dr650 motor instead. just let me know.
albert

Damn, I'd like to see that Bandit! My buddy has a '91 B4 frame in his garage...

[albertinhouston]

I'll pm you some pics in its early stage. it's not complete I just barley got all the bugs worked out of it. then I'll go back and pretty the bike up. i don' want to hi jack this tread..I'll post in the odds and end section.

[octane]

Bah! I already hijacked it - Ken won't give a crap. I promise! Well...I guess a little etiquette wouldn't hurt! I'll check it out!

[werase643]

hijack away  we can make this the garbage sale section

if anybody is interested....
complete 2007 GSXR750 engine kit
except the ignition switch/guages/radiator/head pipe has some dents
complete with wiring, t-bodies, air box, dented tank....blah blah blah

$1500

I have a modded GSXR1k curved rad that had a bung or two added for turbo cooling also

I wondered if you would ever get the XS built.....good idea but way too much custom work

Albert, why the DR in a bandit?   also did you try to buy my DUKE II engine years ago?.....

[werase643]

gsxr 1k swingarm on a b-4 with a 07 FI gsxr750 engine and forks....oooooh i feel a tingling feeling down there.....

[octane]

I think everyone who knew about it wondered if I'd ever get the XS done. I'm going to throw the frame in my attic...just in case I find myself in need of a project someday. I already put a 'busa front end on it - done right with a custom aluminum stem...yadda yadda. Maybe someday I'll get around to doing the 'busa swingarm/monoshock swap too....damn it, I'm setting up projects again!

I also found a NOS tail/seat and a good used tank...both of which are tough to find for a XS11 Standard. Those will get sold though, I need the cash. The motor is proving to be a tough sell though...nobody wants a FZ motor and few realize it's just an R1 mill with milder cams. And the damn thing has zero miles for Pete's sake! So, that may also end up stored for a while...though I can really use that money, so hopefully somebody will pick it up.

[werase643]

i know it is a stupid question.....have you tried the Ri or FZ bbs's?

[octane]

Yeah, hit the FZ board, nothing yet. I don't really want to ship this big ass crate...so I really haven't been trying TOO hard to sell it. I posted on CL hoping someone local would pop up - or somebody I can meet within 100 miles or so for a swap.

[werase643]

dan sold off the stang after the Wif said do what i want with it

looking at a 40 Ford tudor


remember the 53 chrysler in the mtns with no engine.....the hemi is in the trunk, in pieces .... he told me the other day....