ignition key

[frankieG]

i think this is true but have not done it myself yet so i thought i would check with you guys first.  can you go to a local lock shop and get a key cut that will fit all 3 of ignition, fuel cap and seat lock?  thanks guys

[The Buddha]

You can get 1 key that has one pattern on one 1/2 and another on the other 1/2. I call it a half and half.
Not possible for a 3 way though.
Cool.
Srinath.

[frankieG]

so i would need a separate key for the ignition and the gas cap?  my spare is at my mothers in Maine which is an 8 hour drive away, plus crossing the boarder, so i am being proactive because of the "what if" factor

[scottpA_GS]

Do all 3 match? If so. YES your dealer should be able to cut you a key that fits em all... If any are different, then you will be totin 3 keys 

[frankieG]

the dealership here in Fredericton does not cut keys.  i am going to a local lock place to get it done.  i will ride the bike there so i can test the keys.  i have used the same place about ten years ago on my 1980 Honda CB900 and it worked for all 3.  so i am hoping the same will be available on my gsf

[ohgood]

i think this is true but have not done it myself yet so i thought i would check with you guys first.  can you go to a local lock shop and get a key cut that will fit all 3 of ignition, fuel cap and seat lock?  thanks guys

all 15 of mine do. maybe i misunderstood. my ignition, seat, and gas are all accessible with the same key, all 15 copies i have

the locksmith cut 13 of them, just to be safe and lucky

make sure they wire brush the hell out of the copies. if they aren't brushed, they tend to hang: new sharp key into old worn locks.

[frankieG]

15 keys!! wow that is alot

[ohgood]

one for each:
jacket
wallet
car
truck
hide-a-key on the bike
maw-in-law's glove box
maw-in-law's house FL
maw-in-law's house MS
parent's house MS
our rental house (hidden) in MS
the key basket on the shelf
wife's keychain
my keychain X2
maw's keychain X2

finding blanks was the hard part. after i found a smith with a couple dozen blanks, and had a few cut.

does this mean you're still going ahead with the east coast scoot n poot ? cool

[scottpA_GS]

frankie, I know you prob need it quick but if you get in a jam and have the #'s I can cut it for you here @ work and send it to ya 

[frankieG]

what info do you need to cut one?  i just have the one key so i cant send it.  however i am confidant that i can get one cut tomorrow when the key shop opens up

frankie, I know you prob need it quick but if you get in a jam and have the #'s I can cut it for you here @ work and send it to ya 

[Toogoofy317]

The local pop a lock guy cut a key for me for five bucks. Took five minutes standing in the stealership parking lot while they were servicing the bike. It worked better than my regular key!

mary S

[ohgood]

The local pop a lock guy cut a key for me for five bucks. Took five minutes standing in the stealership parking lot while they were servicing the bike. It worked better than my regular key!

mary S

hehe, that's priceless ! now, if you could get someone to come out and change your tires for $20 in their parking lot they might take notice !

[pbureau69]

i think this is true but have not done it myself yet so i thought i would check with you guys first.  can you go to a local lock shop and get a key cut that will fit all 3 of ignition, fuel cap and seat lock?  thanks guys

mine only has 1 key that fit them all... I think you need to reset your keylocks to your key that way your single key will work on all theree keyholes...

[frankieG]

i got 2 made at a local locksmith and they work fine

[scottpA_GS]