Rejetting prices, details, and O rings

flatlander8825 · August 27, 2009, 12:04:12 PM

Heyyyy afternoon all, been using the site for infor for the last year and finally made a account :-p. But to get onto subject, Are you rejetting carbs like the jetkit from factorypro.com? or the annual rejetting for maintenance? Thanks for the info, Bryan

06Busa · September 06, 2009, 02:05:09 PM

PM sent. 98 gs500- Need the 2 o-rings for fuel valve seats (#22 in micro fiche). The 2 on the float assembly tube (#17). I can get a apx measurement of each if need. Actually how much for those & the 2 pilot screw o-rings also?

BeerGarage · November 04, 2009, 01:56:56 PM

PM sent

vash90909 · May 30, 2010, 05:22:26 AM

Pm sent

1fastsuzuki · June 17, 2010, 09:57:33 PM

i can get orings cheap i work in a rubber warehouse.

The Buddha · June 17, 2010, 10:26:18 PM

Yeaaaa ... cool.
You're talking about them gas and oil resistant ones, buna-n or neoprene type right, not rubber rubber ...

Please watch your PM for the most convoluted order ever ...

Cool.
Buddha.

GoldFish · September 24, 2010, 05:52:36 AM

still doing the carb work?

flashcheng · October 11, 2010, 07:56:44 PM

price for a 04 gs500f, bike have slip on F1s and K&N stock filter. clean the carbs out but bike will not stay idle, only runs when the is on full choke.
tks Wing

SoGone12 · October 29, 2010, 09:10:27 AM

Question From Atlanta, Ga!! I have the stock Air Filter (for now) and apperantly a D&D full exhaust system that was added on prior to me buying my 2006 GS500f. I don't see where the pipe would just slip on so this is what causes me to believe its a full system. It runs ok but i've been told that I have to Jet my carbs and replace my air filter to accommodate the exhaust system. Is this true and if so how would you recommend going about doing it. I see a lot of Dyno Jet kits online that require DRILLING and im weary of drilling into my carbs. If its not a bad idea then i'll gladly do so. I know my way around the carbs a little.

MikeMyhal · January 08, 2011, 02:18:58 PM

Sent a PM regarding rejetting of an 05 F.

Slipstream · January 09, 2011, 01:06:11 PM

Sent my order in for 127.5/40 Jets. Thanks for all your help and advice!

jebz240 · February 17, 2011, 08:22:37 PM

Whats the typical turn around on this?

The Buddha · February 17, 2011, 08:26:31 PM

Just jets pretty fast, 2 weeks ... unless you want stuff I dont have on hand. I only got the common GS sizes and types, pm me and I'd discuss what you need and send em out in a few days.
Cool.
Buddha.

viggen · March 22, 2011, 03:45:10 PM

PM sent on Jet set for a stock 2004.

Thanks,
Ed

steezin_and_wheezin · March 22, 2011, 04:29:06 PM

edited: how noob of me! i didn't even try to search the thread i was posting in, my apologies haha

have an 04 and she needs a new filter, thinking of getting a k&n lunch box, and will most likely get a vance and hines or similar full exhaust in a couple months.

- rejetting necessary after installing a lunch box?

Quote from: The Buddha on June 22, 2008, 07:32:31 PM
Stock pipe and Lunchbox sometimes is not very tunable.

pm sent yer way buddah!

SoGone12 · April 05, 2011, 10:05:38 AM

I bought a jet kit from buddha and love'em!!!!!

derango1 · April 19, 2011, 05:00:19 PM

Buddha, you have PM.

gitarooman83 · April 28, 2011, 07:28:52 AM

PM sent to Buddha. Thanks!

bombshelter13 · May 08, 2011, 12:47:51 AM

Budha, I've PMed you about this kit a while ago, please get back to me. Thanks!

bombshelter13 · May 16, 2011, 04:07:35 PM

Still no response

Buddha, have you forsaken us?

News:

Rejetting prices, details, and O rings