News:

New Wiki available at http://wiki.gstwins.com -Check it out or contribute today!

Main Menu

2005 with blown engine... should I buy it?

Started by TarzanBoy, August 02, 2008, 07:20:18 AM

Previous topic - Next topic

TarzanBoy

There is a 2005 for sale here with a blown engine.  I am thinking about picking it up (~$1k) and dropping a new engine in.  I have no idea what the cause of damage was.

How much money and time will I be spending to do this? (approximately)?

scottpA_GS


Should be able to get a motor for $400? or so? Maybe even fix it for less?

I think it sounds like a good price if if doesnt need anything else.


~ 1990 GS500E Project bike ~ Frame up restoration ~ Yosh exhaust, 89 clipons, ...more to come...

~ 98 Shadow ACE 750 ~ Black Straight Pipes ~ UNI Filter ~ Dyno Jet Stage 1 ~ Sissy Bar ~


TarzanBoy

Where would I get a motor?   I don't have a garage... now much time would i take to put a new motor in?

erbilabuc

Quote from: TarzanBoy on August 02, 2008, 08:27:18 AM
Where would I get a motor?   I don't have a garage... now much time would i take to put a new motor in?

yeah dont buy this bike. Pass the deal on to someone else because if you dont have a garage and dont know already were a new motor is then you are going to be hating life. You can buy an 05 running  with some stuff for around $2300-$3200.
you buy this wreck

$1000 for bike
$500 for motor (on a good ebay find plus another $150 to ship it if they arent local)
plus tools+time+labor+what if you are putting on the engine and say you notice the forks are bent or there is head shake that you only get when going 50mph and up.
if the bike was $400-$500 then I would say yes but a 1000$? I would pass because I have seen 01's-04's here in the Souther California area all a few times for $200-300$ with a blown motor.
riders formely known as IMPORTBABE

arbakken

if it's in otherwise good shape, it should be a good pickup. I've been contemplating disassembling my 500 for painting, and it looks like a somewhat talented mechanically inclined person with the right tools should be able to have a motor in/out in a few hours

TarzanBoy

Quote from: erbilabuc on August 02, 2008, 09:24:22 AM
Quote from: TarzanBoy on August 02, 2008, 08:27:18 AM
Where would I get a motor?   I don't have a garage... now much time would i take to put a new motor in?

yeah dont buy this bike. Pass the deal on to someone else because if you dont have a garage and dont know already were a new motor is then you are going to be hating life. You can buy an 05 running  with some stuff for around $2300-$3200.
you buy this wreck

$1000 for bike
$500 for motor (on a good ebay find plus another $150 to ship it if they arent local)
plus tools+time+labor+what if you are putting on the engine and say you notice the forks are bent or there is head shake that you only get when going 50mph and up.
if the bike was $400-$500 then I would say yes but a 1000$? I would pass because I have seen 01's-04's here in the Souther California area all a few times for $200-300$ with a blown motor.

Its not about having a motorcycle... I already have an R6 that I ride daily.    The purpose of getting this bike would be as a project to get a good starter bike at a low price and turn it around cheap for one of my friends (that want to learn to ride)

I will probably get it.  I am just worried about the job become a HUGE headache due to unforseen costs/difficulties.


TarzanBoy

Well, I bought it.   Now the trick is to get the engine swapped before winter.

Where are some good places to find GS500 engines?


commuterdude

that's a nice bike, shoot 1k is pretty good for the parts on that bike, frame w/ title, ya done good.   As for a motor I see them alot on Ebay.
Attack but have a back up plan

Mdow

94 GS500E AKA the Atomic Barny

ATLRIDER

Just wondering how you found the bike.  Craigslist, Cycletrader??

If I could get my hands on a newer model that needed an engine I may go for it.

K&N Lunchbox, K&N Engine Breather, Hella Angel Eyes, Buell Turn signals, Kat 750 Rear Shock, Progressive Springs, MC Case Guards, Aluminum Ignition Cover, V&H Full Exhaust, Ignition Advancer, 15T Sprocket, Srinath Bars, Gel Seat, Dual FIAMM Freeway Blaster horns

bobthebiker

Not a bad deal.  if you can rebuild the motor in it, you're all set.   pulling a motor and putting it back in really isnt too difficult, although I'd suggest having two sets of hands because of the weight/bulk that motor has to it.
looking for a new vehicle again.

Mandres

you should definitely pull the old motor out and see what's wrong with it first.  You could have anything from a single bent valve (<$50 fix) to a thrown rod to a broken crank.  A "blown" engine could mean 100 different things, and engines don't get much simpler than the GS's. 


TarzanBoy

Quote from: ATLRIDER on August 03, 2008, 08:08:29 PM
Just wondering how you found the bike.  Craigslist, Cycletrader??  If I could get my hands on a newer model that needed an engine I may go for it.

Neither.  It was posted on a local rider board. http://www.georgiasportbike.com.

gaspy

+1 Nice find. Sell the fairings before you give it to your friend to learn on. He or she will destroy them!

Quote from: ATLRIDER on August 03, 2008, 08:08:29 PM
Just wondering how you found the bike.  Craigslist, Cycletrader??

If I could get my hands on a newer model that needed an engine I may go for it.


I see you're in Atlanta, but if you're interested in a distant 2005 with engine trouble, keep your eye on my post: http://gstwins.com/gsboard/index.php?topic=43304.0;topicseen. I'm not promising anything, but I'll certainly entertain offers. I'm waiting on a diagnostic from a shop to decide if I will sell.
2005 black/red gs500n

Ronin

Well, either you're part of the problem, part of the solution,...
              - ..or you're just part of the landscape. - lndeed.
   

TarzanBoy

$700 plus shipping for a USED motor with visible damage?  I don't think so!

I have found a '91 wrecked GS500 with a working motor that the guy is only asking $595 OBO for.  It has 22,000 miles on it, but its hard to beat that price.

Ronin

Yep...but 2600 miles VS 22,000 miles? Your call though...good luck. :thumb:
Well, either you're part of the problem, part of the solution,...
              - ..or you're just part of the landscape. - lndeed.
   

ATLRIDER

Quote from: TarzanBoy on August 04, 2008, 07:11:47 AM
Quote from: ATLRIDER on August 03, 2008, 08:08:29 PM
Just wondering how you found the bike.  Craigslist, Cycletrader??  If I could get my hands on a newer model that needed an engine I may go for it.

Neither.  It was posted on a local rider board. http://www.georgiasportbike.com.

Thanks :thumb:
K&N Lunchbox, K&N Engine Breather, Hella Angel Eyes, Buell Turn signals, Kat 750 Rear Shock, Progressive Springs, MC Case Guards, Aluminum Ignition Cover, V&H Full Exhaust, Ignition Advancer, 15T Sprocket, Srinath Bars, Gel Seat, Dual FIAMM Freeway Blaster horns

TarzanBoy

Quote from: Ronin on August 04, 2008, 06:40:17 PM
Yep...but 2600 miles VS 22,000 miles? Your call though...good luck. :thumb:

22,000 is very middle aged.   There is an entire wrecked bike (1990) with a working engine an hour from me for $600 (which is still less than that guy wants for a single engine)

SMF spam blocked by CleanTalk