GS front end and other parts

[psyber_0ptix]

^ haha you get 100 cool points.

yes i have a 2000 Impreza i race and mod but the bike has been taking almost all the funds and time right now.
im sleepysubie on RS25.com if your on their at all

i'm psyber_0ptix on rs25 and nasioc. go figure lol

used to have a swapped 99 L but sold it to go to college

[ATLRIDER]

What the hell?
I've been asking for a left rider's footpeg for two weeks on here.
Where have you been while I have posted and reposted?
I'm still looking for one.

Sorry man.  I'd let you have  them except I have a bike in the garage that's missing both complete front pegs.  I thought you were getting some from 3imo or Buddha.  Passed them up  there when I saw your post.  Anyway, good luck getting what you need.

[NickfurY]

hey, send you a PM's about the exhaust..let me know
thanks

[The Buddha]

alright buddha you done with parts now? is that your total?

Yea ... so we got kat lower triple + stem, the 2 kat 750 upper triples, the black knuckles I sent ya, the stock kat 600 knuckle in your pic and the GS top triple.
Am I missing anything. I'll look thorough the posts ...
Cool.
Buddha.

[Trwhouse]

Hey there buddha,
I still haven't heard back from you on the left front rider's footpeg rubber you thought you might have.
Did you find one in nice shape for me amid all your stuff or amid the stuff you are getting from 3imo or someone?
I think I found bars from coll412 but am still searching for this footpeg in undamaged shape.
Let me know ASAP if you have one I can count on for cheap.
Thanks, man.
Trwhouse

[The Buddha]

Yea and that weird 4 bolt hole thingy that has the ears for fitting somehting ... that.
Now with a kat 750 assy, please include everything ... the doughnuts and grommets and bolt s and sleeves ... dunno what is same as GS, and heck I am not too careful with the GS stuff I chop up ... so those doughnuts are going to be useful ...
Cool.
Buddha.

[The Buddha]

Hey there buddha,
I still haven't heard back from you on the left front rider's footpeg rubber you thought you might have.
Did you find one in nice shape for me amid all your stuff or amid the stuff you are getting from 3imo or someone?
I think I found bars from coll412 but am still searching for this footpeg in undamaged shape.
Let me know ASAP if you have one I can count on for cheap.
Thanks, man.
Trwhouse

K I'll look through and you can have it ... just pay shipping ... what I'm worried about is ... "undamaged" ... you bike is rather nice looking much unlike mine was when it had that blue body on it ... but anyway ... I'll show you what I have. Pick one and its yours.
Cool.
Buddha.

[Mdow]

Yea and that weird 4 bolt hole thingy that has the ears for fitting somehting ... that.
Now with a kat 750 assy, please include everything ... the doughnuts and grommets and bolt s and sleeves ... dunno what is same as GS, and heck I am not too careful with the GS stuff I chop up ... so those doughnuts are going to be useful ...
Cool.
Buddha.

yup i will rebuild the 750 upper tripple to make sure i have it all but its all in the same box i have everything ill let you know when i get it boxed up ill figure a discounted price

[The Buddha]

OK that katana knuckle ... add that to my pile too and remember shipping free ...
And whatever is that flat plate thing with the 2 ears on it shock mount off some weird ass bike ... sounds like I should get it ... does it have a $$ ... how much.
Cool.
Buddha.

Hey Mdow - I been asking for that flat thing with 4 holes and 2 ears ... This pic has it ...
Cool.
Buddha.

[Mdow]

OOO thats the top shock mount for a 91 GSXR shock im keepin that guy if i need to bolt the shock up to a solid mount again to work on it

i didn't figure it into the price anyway

[The Buddha]

Whaaaa ... so that's what it is ... it cannot be used on a GS, people fit those newer 96 and later top mount things ... cos they are a clevise with a tail bolt ... you can do a ride height adjustment with a washer if you had that ... but this is not useable on a GS ...anyway ... no problem ...
Cool.
Buddha.

[Mdow]

ya you would have to do some SEROUS frame work to get that thing bolted in the frame.

not sure why they didn't make the top shock mount part of the frame on the GSXR

ill PM you a couple shock questions

[The Buddha]

Hey Mdow ... I have another thought about how the bars fit your bike ...
I think you have 750 handle tubes in the 600 knuckles. The tubes sink less in the 600 knuckles cos the 750's are made for that single center notch ... A 600 tube in a 600 knuckle will be sticking out 1-2 mm to the inside ... that extra room you get ~1 inch makes it fit ... You are actually better off pushing it through and notching the right spot on the tube.
Cool.
Buddha.

[Mdow]

Hey Mdow ... I have another thought about how the bars fit your bike ...
I think you have 750 handle tubes in the 600 knuckles. The tubes sink less in the 600 knuckles cos the 750's are made for that single center notch ... A 600 tube in a 600 knuckle will be sticking out 1-2 mm to the inside ... that extra room you get ~1 inch makes it fit ... You are actually better off pushing it through and notching the right spot on the tube.
Cool.
Buddha.

negitive ghost rider.

i was going to use the 750 handles but the notch for the holding bolt was about an inch too wrong and i really didn't feel like notching them

im using the handle bars that came on the 89 kat 600 upper tripples never taken them out

[The Buddha]

OK, you have stock GS grips ? and if not, your grips dont hang over the end of the bar ?
BTW katana grips will be the ones that exacerbate the problem, they are thicker and longer.
Cool.
Buddha.

[Mdow]

Stock GS controls and grips and no over hang

[The Buddha]

OK that is where you've compensated ... GS grips are skinnier and not that cushy and are shorter than kat grips. Kat 600 handle tubes are a shade longer than 89 GS tubes.
The typical brake banjo issues come when you are running kat grips in 89 handle tubes or even sometimes kat grips on kat tubes.
Cool.
Buddha.

[Yev]

PM'ed you about the headlight mounting brackets..

[Mdow]

headlight brakets sold

[The Buddha]

http://gstwins.com/gsboard/index.php?topic=45320.0

Mdow - That is a preorder for what I was telling you about 1-2 months ago.

I dunno if you still want that or are happy with what you have ...

If you dont want that, I guess just send me the stock kat 600 triple, and the stock GS triple and I'll put a bullet in the thing and call it a day. Cos I sure as hell am happy welding ears on the kat triple, so I dont quite care ...

Cool.
Buddha.