For Sale: Kat 600 forks/ GS tail in central NC

[werase643]

I have had some time so I made some spacers for the Kat triples with my lathe
added a spacer under the lower brg and a small spacer above the upper brg
I did not hack the stem out of the lower triple and weld it back in
and I found a front axle for it

94 kat 600 triples/forks/brakes/axle . . . . SOLD!!!!!!!
forks do not have blown seals!!!!!
master cylinder has a scrape....not perfect but will work
brakes probably need a good cleaning fresh fluid and pads before use
$225+actual shipping cost
I can fab some brackets($25 range) for the gauges but so could you for cheaper
you will need to find a pair of kat rotors




yes the $ went up a little...but i did fabricate spacers for it to bolt onto a GS


If you bring your bike to me I'll install the tripples and forks for good FOOD and a beer
If you bring all the parts needed i/we can install everything

89-2000? tail plastic
all 3 pieces
no cracks
just flat black primer? ( i didn't paint it)
$60 + actual shipping charges



funky vintage handlebars
4 inch rise with adjustable pull back
set at about 6 inch pullback
remove a screw loosen a bolt and pull the bar out and relocate....no I have not tried it( I did remove the paint so it could be done)
I have had for 10+ yrs no idea on brand   just kewl looking
$20+ actual shipping charges

[werase643]

front end waiting for member to come look at it in person...TODAY!

[The Buddha]

The bars look like honda nighthawk S bars.
Cool.
Buddha.

[average]

That looks like my paint work on those tailpieces lol

[cstilt]

Still available?

[werase643]

forks are gone and about 90% installed

[jeremy_nash]

hey werase, I need a set or your spacers so I can put on my katana 750 forks please pm me a price, and when you could get them made