Anyone have an IGNITOR?

[~*STEPH*~]

I'm looking for an ignitor assembly for a 1990 GS500E.  Does anyone have one for sale?  Looks like this
http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/2/Make/Suzuki/YearID/31/Year/1990/ModelID/6311/Model/GS500E/GroupID/259172/Group/SIGNAL_GENERATOR

[The Buddha]

I'll bet its not the igniter which is part #1.
Is that what you're trying to buy ?
Cool.
Buddha.

[jeremy_nash]

if your talking about part 1, that would be the signal generator.

[dgyver]

Part #1 is the ignitor. Got several. $20 + shipping

If you need part #3, the signal generator, got that too. $30 + shipping

[jeremy_nash]

my bad, I checked on bikebandit, and they called that the signal generator

[~*STEPH*~]

I found one on Ebay for a good price.  But thanks though!!!

[dgyver]

Cool. If ya need any other part let me know, selling off all my stuff.

[The Buddha]

D man - I could use a wiring harness if you got one as well as that ignitor box.
Why you selling all your stuff ?
I'm thinking, worth a trip to scrape up some cool hot rod parts ?
Like that head you had ... though its a bit extreme for a street only slow poke like me.
Cool.
Buddha.

[dgyver]

I know I have a 89 wire harness, a couple of race harnesses, and I should have at least one (maybe 2) 90-02 harnesses.

Are you talking about the ported head?

Just need more room for other projects. Almost finishing putting together my SV, so no need for the GS and parts anymore.

[The Buddha]

This head had necked valve stems, cut down guides among other things. Yes it was ported and flowed too if I recall. Cams ? it had modded ones ... you got any modded cams otherwise. That could be a single mod I'd do and ride it and turn while as a ghost ...

Street bike ? you think I will break that head by riding it for miles and miles ... on the street, running 87 gas and riding like an old man.

Cool.
Buddha.

[dgyver]

Yeah same head.

I have a set of damaged Megacycle cams I would sell for $75. One of the exhaust lobes has some chips in it. They can weld and grind it, not sure what they would charge.

[dgyver]

I just realized that I am going to be using that ported head on the 569 motor.

I do have other heads, just not what all I have. There is a milled head but I believe it has a bad valve seat.

[The Buddha]

Milled - I know some guys who can mill em ... no big deal there. Just the seat broken or valve broken too ?

Cam shaft sounds good ...  I may know of people who can weld em ...

I'll let you round up all the stuff you're sure you not gonna be using, I'll come by in a few weeks and scrape em up.

You build that GR motor up ? What are you running on it ? Looking for ideas there, I have to split one to fix the base gaket.

Cool.
Buddha.