News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

Sticking slide and holes in the rubber diaphragm

Started by DanUK, July 14, 2011, 02:54:52 PM

Previous topic - Next topic

DanUK

Okay so i was playing around with the carbs the other night and i noticed that i have a small pin hole in one of my rubber diaphragms and 2 pin holes in the other rubber diaphragm. I also noticed that one slide is sticking a bit, when i push it up it comes down a little bit then stops for a milisecond and then starts again, where as the other slide comes down smooth. My bike runs quite well at the moment but i was wondering whether this could cause a problem. Thanks Dan.
Stock Suzuki GS500 K4
Jetting: 20/60/130 clip position: 3rd from top.


ben2go

Change both diaphragms and pull the slide guides and inspect them.Some people use 2 stroke oil to lube the guides.

http://gstwins.com/gsboard/index.php?topic=24036.0
PICS are GONE never TO return.

DanUK

where would i buy just the diaphragms? Is it a buy second hand carbs off ebay job? Or get them straight from suzuki?
Stock Suzuki GS500 K4
Jetting: 20/60/130 clip position: 3rd from top.

ben2go

Quote from: DanUK on July 15, 2011, 09:43:10 AM
where would i buy just the diaphragms? Is it a buy second hand carbs off ebay job? Or get them straight from suzuki?

I can't find any cheaper aftermarket ones so Suzuki is the best choice.The part number is 482459-001 and bike bandit website has them for $23.27.Check your local Suzuki shop first.Sometimes they have them for a price that will beat shipping cost.Most places online are gonna charge a minimum of $7 shipping on small items.
PICS are GONE never TO return.

sledge

Errr........you can get them in the uk. NRP carbs list them for £26 each.....about a tenner less than the dealers charge.

http://www.nrp-carbs.co.uk/suzuki_carburettor_diaphragms.htm

DanUK

that site says for the gs500 89-01 mines an 04 bike, did the diaphragms change at all?
Stock Suzuki GS500 K4
Jetting: 20/60/130 clip position: 3rd from top.

DanUK

Also i just found this one on ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=180688517212

should do the same job as the suzuki dealers ones , just a bit cheaper. Or would you stick to oem parts?
Stock Suzuki GS500 K4
Jetting: 20/60/130 clip position: 3rd from top.

RichDesmond

Quote from: DanUK on July 15, 2011, 01:52:25 PM
Also i just found this one on ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=180688517212

should do the same job as the suzuki dealers ones , just a bit cheaper. Or would you stick to oem parts?

Stick to OEM if the price difference isn't much.
Rich Desmond
www.sonicsprings.com

ben2go

Quote from: sledge on July 15, 2011, 12:08:18 PM
Errr........you can get them in the uk. NRP carbs list them for £26 each.....about a tenner less than the dealers charge.

http://www.nrp-carbs.co.uk/suzuki_carburettor_diaphragms.htm

Sledge has the hook ups in the UK.  :icon_rolleyes:

Didn't realize the UK in DanUK stood for United Kingdom.I was thinking University of Kentucky.Sorry bout that mix up.  :icon_rolleyes:
PICS are GONE never TO return.

SMF spam blocked by CleanTalk