I need help adjusting my float heights

[pacitup01]

If anyone can give me some pictorials or anything that shows how to adjust my float heights would be awesome i have a 1994 gs500e and it is running mad rich

[burning1]

Remove the float bowl, flip the carbs upside down, and lean them until the float needle just touches the valve seat. Measure the height of the float above the carb body.

Alternatively, you can attach some thin vinyl tubing to the carb drain port, bend it upwards, and open the drain valve. The height of the fuel should typically be at about at about the level of the gasket between the float bowl and the carb body.