What have you done for your bike today????

[rayshon]

so that's what the inside of a GS engine looks like... neat!

[steezin_and_wheezin]

haha that's just the tip of the iceberg!

[slipperymongoose]

I missed out on my all 2's shot

[mister]

This is in kilometers, not miles. This distance in miles is 27,777 miles.



Yeah, I missed my "All Twos" as well. But I figure most bikes get at least that far so no biggie. But the rest, yeah, like small milestones on the way to 100k, when the odo rolls over. So the 99,999.9 shot will be most impressive 

Michael

[gtscott]

well a few days ago i put a standard headlight off an 05 model onto my bike to replace the shithouse twin lights my brother had installed
and today i put a nice 2004 model stock exhaust on it to replace the scratched and groved shaZam! on that was on it (thanks to brothers wife dropping it a long time ago)

[Watevaman]

This is in kilometers, not miles. This distance in miles is 27,777 miles.



Yeah, I missed my "All Twos" as well. But I figure most bikes get at least that far so no biggie. But the rest, yeah, like small milestones on the way to 100k, when the odo rolls over. So the 99,999.9 shot will be most impressive 

Michael

Ooh man, I really like those temp/clock housings, mind telling me where to get some?

[adidasguy]

I had them, too before I switched to OEM clip-ons. Now I just have the clock with a stem mount.

www.clocks4bikes.com

[mister]

I had them, too before I switched to OEM clip-ons. Now I just have the clock with a stem mount.

www.clocks4bikes.com

Cheaper from their ebay store http://myworld.ebay.com/ebaymotors/clocks4bikes/

They (Ross and Linda) are VERY helpful and great to deal with.

Michael

[Dresnewtoy]

Just changed the lame stock horn with dual Wolo 115db discs. Very loud!

[NorwayGT1]

has anyone tried to put a train horn on their bike lol???

[mimikeni]

Replaced cotter pins in the wheel nuts and cleared out a space in the garage for winter storage

[slipperymongoose]

has anyone tried to put a train horn on their bike lol???

I'll answer this with a no.......... But you could pick up an air horn kit from an auto parts store cheap enough. Main reason I say no is because the air horns that are used on the locomotives I work on require 100 psi to operate.

[NorwayGT1]

yeah i didnt think about that part before i posted that... my bad

[ryott52]

has anyone tried to put a train horn on their bike lol???

A buddy of mine has one in his truck, the compressor is a bit large and runs off a separate battery though. Perhaps a Gold Wing or a big Harley?

[Dresnewtoy]

Took the sproket cover off and cleaned that gunk left by the chain.

[Mart3y]

Its been a while since i've posted, but today I bought my little GS a friend, well they can be friends until the GS is sold.

I got myself an '08 GSXR 750

[Cosimo_Zaretti]

Do the coppers in QLD hassle riders on aftermarket pipes and fender eliminators much?  That's a tidy looking Gixxer that could look even better with the bulky stock pipe and mudguard removed.

[rayshon]

hot damn that 750 is nasty!!!

(Nasty in a good way  )

[mister]

Do the coppers in QLD hassle riders on aftermarket pipes and fender eliminators much?  That's a tidy looking Gixxer that could look even better with the bulky stock pipe and mudguard removed.

If you visit Glorious with all the other wankers and the cops have a roadworthy blitz, they will do you for both pipes and fender eliminator - and rego roll if you have one of those. No warning, cause blitzes exist to make money not educate.

Solution = don't ride where the blitzes are likely to be. That means, don't do Glorious on the weekend. And if you ride Numinbah from Cunungra, pay real close attention to twirly fingers signs from oncoming riders - or ride behind a large group so they get pulled up and fill the spaces so you can get by without interruption. I prefer to just avoid those areas - where the roads are just as good, crotch rocket guys seldom visit cause it's too far for them, and the traffic is light and scenery and lunch stops nice too 

If you are just riding around like normal, it's doubtful you'll get pulled up for pipes or fender chop.

Michael

[slipperymongoose]

What's the go with the fender chop?