Pc plans, goped plans, and motohuffy

[yamahonkawazuki]

yes being broke slows this shiite down a bit. but it keeps my mind on a level playing field/level plane. as far as pc build plans goes am going to go with this:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1970063&csid=_61 i can upgrade the cpu later on. which in itself isnt bad. the gpu needs help though. another hundred covers that. . now to gopeds:
http://www.goped.com/products/gsrsport/default.asp its a gsr40. the one stolen from me was a gsr25. which i built piece by piece. , now to motohuffy:
am getting my hands on a tap set at friends pawn shop tomorrow and will have block prepared soon thereafter
( good thing about being on good terms with a pawn shop. theres LOADS of tools to borrow. as long as its nto the ONLY one avail. and ppl want it. theres 9 tap sets avail. found an electric start backpack blower i could use on a goped build. battery and flywheel maybe adds 1.5 lbs to it. whoppty doo. gearing and a good pipe takes care of that / my plans aside. any of yall have plans for minor thigns liek this?, anythign goes. links helpful . so we can drool along with you. i want to have motohuffy finished in time to hit the dragon. along wiht a few other motorised bicycles. or wouldnt mind taking a goped through it. had palns for this. except thief said i dont think so.  ( i know where he lives and works. but me being the better man, shelved revenge plans indefinately

[yamahonkawazuki]

its chinese but heck. have access to parts. can goped this easily. but am broke so only dreaming lmao
http://www.ebay.com/itm/ScooterX-X-racer-49cc-Black-Gas-Powered-SX-13-/221046452054?pt=LH_DefaultDomain_0&hash=item3377652f56

[yamahonkawazuki]

damn i miss battlepig

[yamahonkawazuki]

battlepiglet. my first goped hard tires no suspension. aka very non forgiving and wheelies w/o much help at all

[codajastal]

damn they're expensive for a scooter

[yamahonkawazuki]

damn they're expensive for a scooter

theyre also not chinese. battlepiglet was a 1993 model on its original engine. battlepig was a 2004. i want to build another one.  btu this oen will be theft proof.

[yamahonkawazuki]

a sport runs around 450 or so. a gsr sport 525ish, a gsr29/25 550, gsr40 closer to a thou. a gtr ( offroad 1100 or so)  effin fun i tell ya. you ever visit me, ill have one built up and will elt you ride it. all you want. friggin addictive.

[codajastal]

lol so much money for so little, but so little money for so much fun

[yamahonkawazuki]

DAMN i want this one. it is a roller. but found a 40cc electric start backpack blower engine almost a direct bolt on.
http://www.ebay.com/itm/GOPED-BIGFOOT-BIG-FOOT-SCOOTER-ROLLER-PARTS-NO-MOTOR-MOPED-/130721878204?pt=LH_DefaultDomain_0&hash=item1e6fa190bc

[yamahonkawazuki]

my body cannot handle a 3rd job. but goin for it anyways. friend who got severely crushed by her tow truck, is trying to get back to work. i forbid this. am working at her lot prepping cars for sale. also this 150cc chinese sit down scooter. converting to a standup. aka bypassing the moped/motorcycle law  got it to run day before yesterday. today after my second doc appt. going to put it up on rack and tune it up.

[yamahonkawazuki]

shaZam! i just had an idea to beat all of em. i get my hands on one of these again. 3-400 ish
take the 66cc engine i have for motohuffy., purchase a pullstart, rig a mount an mount said 66cc engine on Überbattlepig, pull start necessary because of the high compression. and the scoot cause of leg problems developing. i can ride this one legged if i have to. plus i have hte huiffy and the haro still if things improve with my feet

[yamahonkawazuki]

the pullstart http://www.ebay.com/itm/Alloy-Pull-Start-Starter-49cc-60cc-66cc-70cc-80cc-Motorized-Bicycle-silver-/140638308068?pt=LH_DefaultDomain_0&hash=item20beb246e4

[codajastal]

DAMN i want this one. it is a roller. but found a 40cc electric start backpack blower engine almost a direct bolt on.
http://www.ebay.com/itm/GOPED-BIGFOOT-BIG-FOOT-SCOOTER-ROLLER-PARTS-NO-MOTOR-MOPED-/130721878204?pt=LH_DefaultDomain_0&hash=item1e6fa190bc

[yamahonkawazuki]

DAMN i want this one. it is a roller. but found a 40cc electric start backpack blower engine almost a direct bolt on.
http://www.ebay.com/itm/GOPED-BIGFOOT-BIG-FOOT-SCOOTER-ROLLER-PARTS-NO-MOTOR-MOPED-/130721878204?pt=LH_DefaultDomain_0&hash=item1e6fa190bc

sucks working in a pawn shop. although i dont have ot pay for tools needed, i find all sorts of shaZam! i could use in a project/s if i could save $500, i could damn near clean that place out lol. and fill my toolbox and spare engine stash lol

[yamahonkawazuki]

goped sport:
https://www.youtube.com/watch?v=lznz47q7taU
goped gsr25 ride to margaritaville. ( this was the one stolen lol)
https://www.youtube.com/watch?v=qFpKt_faQdY
gsr40 DAMN I WANT lololololol
https://www.youtube.com/watch?v=z8TgvmwQrAI

[yamahonkawazuki]

if i build another goped. i plan on making my own handlebars. using con rods and pistons from a gs. almost have my 13b clock finished lol

[yamahonkawazuki]

doc, and chiro want me off bike for a while. ( hips are messed up. xrays looked atrociousas did back) that aside. going to source a gsr goped rolling chassis and use the engine from motohuffy aka a 66cc goped. but am also setting it up so the engine can be swapped between the goped and the huffy in 45 minutes. but following docs orders atm. sourcing a goped rolling chassis atm. found a few. may just buy a frame and build it piece by piece

[yamahonkawazuki]

LMAO donut city
https://www.youtube.com/watch?v=IMPwlioIpyc&feature=related

[yamahonkawazuki]

my buy list if i build my own
frame: http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.4666/.f
fork: http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.4438/.f
wheels: http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.7680/.f
mainly only thing left is a handlebar setup. those are available used or from other goped parts suppliers

[Paulcet]

LMAO donut city
https://www.youtube.com/watch?v=IMPwlioIpyc&feature=related

)