News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

no more mikuni 62.5?

Started by Phil B, August 20, 2012, 09:02:50 PM

Previous topic - Next topic

Phil B

So.. i went to both bikebandit.com and bikecarbparts...
looked up what the wiki says for drop in, stock exhaust:


pilot, 20    (n224.103)
mid 62.5    (n102.221)
main 137.5



but... nowhere seems to have the mikuni in 62.5 . only 60 or 65.

now what?


Bluesmudge

Maybe Buddha still has some.

Or, drill out a 60 with a #72 drill bit (equal to about a 63.5)

Big Rich

Did you check on Sudco's site? They are the North American Mikuni dealer.
83 GR650 (riding / rolling project)

It's opener there in the wide open air...

mitch79

You can still get them mate, http://www.ebay.com/itm/150637795093
I bought mine from Niche Cycle Supply without issue :)
2006 GS500F




bombsquad83

Quote from: mitch79 on August 20, 2012, 10:45:31 PM
You can still get them mate, http://www.ebay.com/itm/150637795093
I bought mine from Niche Cycle Supply without issue :)

Niche Supply is a good supplier through Ebay.  I'd recommend them.

steezin_and_wheezin

jetsrus.com usually has everything both true mikuni and knock off. i've ordered through them and haven't had a single problem

here's the small mains:
http://jetsrus.com/a_jets_by_carburetor_type/jets_mikuni_N102-221_main_Small_round.htm
if yer binders ain't squeakin, you ain't tweakin!

The Buddha

I have not found 62.5 in years. However I also dont think they are neccesary, washer up the needle and you're OK.
Cool.
Buddha.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

SMF spam blocked by CleanTalk