GSXR Rearset Conversion Kits For Sale

skunkteeth · February 19, 2013, 11:25:20 AM

I have 10 kits to adapt rearsets from a GSXR (600 K1-5, 750 Y-K5, 1000 K1-4) to our bikes! This is all thanks to mitch79 (http://gstwins.com/gsboard/index.php?topic=61148.0).

I am not trying to make any money off of these kits, I had to purchase the plates with a minimum order so that is the reason for selling them.

The connecting rods I am including have a yellow zinc finish. I did not realize this when I ordered them. I am painting mine black. You can also sand then clearcoat the rod.

The plates are waterjet cut from 3/8 aluminum stock then tapped. The plates are not as pretty as machined plates so they will need to be sanded and painted, or only sanded for a bare aluminum look. I painted mine black to match the frame. The holes are tapped.

What you get:

2 adapting plates
4 mounting bolts
1 connecting rod.

I will get pics up tonight. Price is $45 shipped per set.

Thanks

weedahoe · February 19, 2013, 11:42:17 AM

I have a set of GSXR 1100 rear sets I powder coated some time back and haven't put on so this might work for them. I'm down for a set

PatheticPuma · February 19, 2013, 05:12:17 PM

When you say connecting rod, are you talking about the shift linkage?

skunkteeth · February 19, 2013, 05:19:41 PM

Yes, it is a LH/RH M6 rod at the right length.

Janx101 · February 19, 2013, 05:44:02 PM

yep righto ... how much shipped to Aussie?....... or... ship to adidasguy.. and i buy a chainguard from him ... then bundle together for o/s shipping... hmmmmm

skunkteeth · February 20, 2013, 10:14:24 AM

Sorry didnt have time for pics.

I will look into shipping to aus once I get them all packaged after pictures. I am cool with shipping to adidas.

Thanks

skunkteeth · February 20, 2013, 10:22:20 PM

Picture added to first post.

PM me for paypal info.

Thanks

weedahoe · February 21, 2013, 06:48:41 PM

Woo. Funds have been sent for a set! Cant wait to get these

Janx101 · February 21, 2013, 07:34:10 PM

pm sent

weedahoe · February 21, 2013, 10:05:22 PM

IDK if anyone is interested, but I have a spare GSXR 1100 right side rear set

MVent03 · February 21, 2013, 11:59:35 PM

How do they connect on the right side? to the rear brake controls?

skunkteeth · February 22, 2013, 08:28:07 AM

I suggest getting the right with the master cylinder from the gsxr. I used the gs master but the brake pedal sits a little high even at max adjustment down. I could cut the master cylinder rod but it'll be easier to switch the master. The brake light switch from the gs works too.

weedahoe · February 22, 2013, 09:37:57 AM

Quote from: MVent03 on February 21, 2013, 11:59:35 PM
How do they connect on the right side? to the rear brake controls?

I have pics of mine in the link in the first post. However, the post below is true. In only mention having the extra piece because I don't want skunkteeth stuck with these pieces.

Quote from: skunkteeth on February 22, 2013, 08:28:07 AM
I suggest getting the right with the master cylinder from the gsxr. I used the gs master but the brake pedal sits a little high even at max adjustment down. I could cut the master cylinder rod but it'll be easier to switch the master. The brake light switch from the gs works too.

That's true and how I had to do mine. Obviously the master cylinder has to get turned also but it can be made to work

robtech · February 23, 2013, 07:48:12 PM

got a pic of them mounted up? im interested

MVent03 · February 23, 2013, 11:26:30 PM

I payed for a kit today. I'll be shopping for the rear sets now. I'm assuming since nobody has said anything about the brake lines, that the GSXR master cylinder and brake lines are compatible? This might be a good time to install brake lines too since I'll have to drain it anyway.

weedahoe · February 24, 2013, 05:38:02 PM

Quote from: robtech on February 23, 2013, 07:48:12 PM
got a pic of them mounted up? im interested

Pics are in the link in the first post

robtech · February 24, 2013, 06:57:28 PM

weird! when i posted i was using my phone and none of those pics showed up...thanks for reminding me to check again on the computer look killer

skunkteeth · February 25, 2013, 09:53:33 AM

Going to be shipping those who bought over the weekend USPS priority tonight

7 sets left

Thanks

MVent03 · February 25, 2013, 07:32:56 PM

Thank you! I'm shopping for GSXR rear sets now.

If i buy the hardware aftermarket, like these - http://compare.ebay.com/like/330738411154?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar -

. . . all I need in addition is the rear master cylinder and reservoir off a compatible set right?

skunkteeth · February 26, 2013, 02:07:00 PM

That linkage rod will be too short. You can use the gs master but may need to cut the linkage rod shorter to get the proper pedal position. I used a gs master and the pedal was too high. Looks like you need springs also.

I have a right gsxr rearset that I originally used but the pedal is *slightly* bent. It could be bent back or shimmed if anyone wants it.

Thanks

News:

GSXR Rearset Conversion Kits For Sale