trying to bring the gs back

[nomore240sx]

i chopped off my stock exhaust on 89 gs and i installed a shorty pipe.. its same as a straight pipe with a POS baffle... am going to be putting a lunchbox so i need to figure out the jetting... i was thinking 40/145 2 washers and 3 turns out LMK your opininon

[The Buddha]

i chopped off my stock exhaust on 89 gs and i installed a shorty pipe.. its same as a straight pipe with a POS baffle... am going to be putting a lunchbox so i need to figure out the jetting... i was thinking 40/145 2 washers and 3 turns out LMK your opininon

40/150/1 #4 washer/3 turns ... get non bleed pilots, and 150 large round mikuni mains. And set floats to the correct level.

I sell a package, $25 shipped. But find a local dealer who will get you right parts and you're good.

Cool.
buddha.

[nomore240sx]

your package comes with the 4 jets and washers or just the jets...anyhow i think am ganna go with you since jet r us wants a little more

[The Buddha]

your package comes with the 4 jets and washers or just the jets...anyhow i think am ganna go with you since jet r us wants a little more

Jets, washers, bolts for your set up, on an 89-00 there isn't even a way to do it wrong ... 
On the 01+ with mids yea ... 

Cool.
Buddha.

[nomore240sx]

your package comes with the 4 jets and washers or just the jets...anyhow i think am ganna go with you since jet r us wants a little more

Jets, washers, bolts for your set up, on an 89-00 there isn't even a way to do it wrong ... 
On the 01+ with mids yea ... 

Cool.
Buddha.

Count me in... just let me know where to pay ... you wouldnt happen to sell the lunch box too??

[The Buddha]

your package comes with the 4 jets and washers or just the jets...anyhow i think am ganna go with you since jet r us wants a little more

Jets, washers, bolts for your set up, on an 89-00 there isn't even a way to do it wrong ... 
On the 01+ with mids yea ... 

Cool.
Buddha.

Count me in... just let me know where to pay ... you wouldnt happen to sell the lunch box too??

PM me - and I only sell stuff that has proved to be hard to get from your local dealer.
I buy these from the local dealer and I've yelled and screamed @ those guys for years ... so I get correct parts. If your dealer will get the right parts for you, the info is free.
Anyway, I dont sell K&N cos well, the sources online have been fine or some people get dealers to get those.
PM me for jets.
Cool.
Buddha.

[nomore240sx]

My tail swap

[AnonRider]

that's a nice swap! nice machine in general!

was it very difficult to do?

[nomore240sx]

that's a nice swap! nice machine in general!

was it very difficult to do?

thanks... i still got lots of work to do