installing pro grip 719s-how to add heating element?

[AnonRider]

I'll be installing the new grips soon but I would like to add a heating pad under them as I realize that most of my driving is delayed due to my hands getting too cold. I see the heating element for under 10 dollars and I was wondering how to get power to it exactly. Do I just splice it to any wire? I've never done anything like this before so treat this thread as if I have zero electrical knowledge.

[rexpepper651]

there is a how to add headed handgrips in the gstwin wiki. a quick search for heated hand grips got me alot of results. the wiki is a good choice and also this thread --->>http://gstwins.com/gsboard/index.php?topic=62670.0  you can wire them up to  switch and use the wiring method in the link provided. should get you in the right direction. ive been wanting the same thing but have put it off till last of my to-do things.

[AnonRider]

there is a how to add headed handgrips in the gstwin wiki. a quick search for heated hand grips got me alot of results. the wiki is a good choice and also this thread --->>http://gstwins.com/gsboard/index.php?topic=62670.0  you can wire them up to  switch and use the wiring method in the link provided. should get you in the right direction. ive been wanting the same thing but have put it off till last of my to-do things.

Thanks for the link, I've read through that thread but this is where it gets fuzzy for me"

I have a direct connection from the battery already pulled out for trickle charging, so I got lucky there. I just extended the included wires and just taped the heaters to the outside of my grips.

so, how do i get this powered exactly? just open up the cable attached to the starter and twist the heater cables to that cable enclosing it with electrical tape?

http://www.amazon.com/gp/product/B00COGW51A/ref=s9_simh_co_p468_d0_i2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=typ-top-left-1&pf_rd_r=09SMXFCTRH96DCA4843W&pf_rd_t=3201&pf_rd_p=1780082482&pf_rd_i=typ01 this is hte kit in question

[rexpepper651]

i guess thats one way of doing it. you also could use a power wire from the battery with a inline fuse to a switch and use a ground wire from in the headlight or just run a ground from the battery. another option i saw was using the wiring for the park light which is inside the headlight. a wiring diagram will give you the colors.  heres a diagram for you in color.

[AnonRider]

i have no idea what in the hell i'm looking at whenever anyone posts a diagram. it looks like the biggest jumble in the world to me. I would need to see what it actually looks like.

It looks like the black and red lines on the unit are connected and meet up into one loop. (again, i have no electrical experience so i have no idea what i'm talking about)

i'm talking about these right here: http://www.amazon.com/Toolmall-Motorcycle-Motorbike-Heated-Heater/dp/B00IZ8CCJQ/ref=lh_ni_t?ie=UTF8&psc=1&smid=AIR2VQG8HOY2R

they seem easiest to install as per the instructions, but i want to make sure i do it correctly. please advise.

[jdoorn14]

The great thing about those diagrams is that the wire colors presented are correct for the year(s) noted for the diagram. That combined with knowing where to find the specific wires should help.


Sent from my iPhone using Tapatalk

[Gorilla]

These are the heated grips I bought last week super nice.



[attachment deleted by admin]

[AnonRider]

i would have gone for a premade grip but i really do enjoy the feel of the progrip 719s, really nice and my hand doesn't fatigue with them

[rexpepper651]

i suppose the easiest route for you would be to run a inline fuse from the positive on the battery to the switch and ground. isnt as nice looking and neat but will get the job done.

[AnonRider]

i suppose the easiest route for you would be to run a inline fuse from the positive on the battery to the switch and ground. isnt as nice looking and neat but will get the job done.

so i'd buy this:

http://www.amazon.com/Absolute-AGHPKG4BL-Gauge-Power-In-Line/dp/B00B3PB8PW/ref=sr_1_12?ie=UTF8&qid=1400384883&sr=8-12&keywords=inline+fuse

and attach it to the positive on the battery and then i would insert the end of this into the fuse?:

http://www.amazon.com/Toolmall-Motorcycle-Motorbike-Heated-Heater/dp/B00IZ8CCJQ/ref=lh_ni_t?ie=UTF8&psc=1&smid=AIR2VQG8HOY2R


and voila it would work?


if yes, then i'm going to buy this stuff right now!

[rexpepper651]

Noooo. thats 4 gauge wire man thats some thick ass wire for subwoorfers in autos. you need this.--> http://www.amazon.com/In-line-ACT-Water-resistant-Fuse-Holder/dp/B0002KR88A/ref=sr_1_1?ie=UTF8&qid=1400386108&sr=8-1&keywords=inline+fuse 4 youll also need one of these for the negative side http://www.amazon.com/Gardner-Bender-10-104-Terminal-16-14/dp/B000BVZBRU/ref=sr_1_1?ie=UTF8&qid=1400385684&sr=8-1&keywords=ring+terminals

also you need these connectors but they are cheaper at your local auto parts store. they need to be heat shrink ones to water proof. just melt with a lighter till a little clear goo comes out the end around the wire and crimp them on with either wire cutters or needle nose pliers.

http://www.amazon.com/Forney-54825-Connector-Shrink-10-12/dp/B009PHFNGA/ref=sr_1_12?ie=UTF8&qid=1400386294&sr=8-12&keywords=heat+shrink+wire+connectors

but like i said above all this can be found at your local hardware or auto parts store for the quantities youll need and for much cheaper. only thing the hardware store wont have possibly is the inline fuse.

[rexpepper651]

oh yeah i forgot everything is going to need to be the same size. the wire connectors need to be for the specific gauge wire that the grips came with. i tried finding it one the site but i cant tell. could be 10 gauge im guessing. too big of connectors they wont crimp on well too small and the wire wont be able to go inside to make the connections.

[robfriedenberger]

The forum is awesome for sharing knowledge and information, but from what I've read so far I would highly suggest getting some in person assistance. Wiring isn't any thing to play, the risk of shock, burns and damage is very real.

Obviously you have to start somewhere, and it's your bike so you'll do as you please, but I just wanted to make that suggestion. As always we are here to help!  Idk where your from but there might be a local forum member near by willing to help.


Sent from my iPhone using Tapatalk

[Gorilla]

I suggest the same thing rex. Sorry but my major electrical knowledge is not any good. I bought those amazon grips for that very reason. I don't know jack diddly about diagrams.

[AnonRider]

I suggest the same thing rex. Sorry but my major electrical knowledge is not any good. I bought those amazon grips for that very reason. I don't know jack diddly about diagrams.

I have some marines staying at the hotel i work at, i happened to start a conversation with one and he happened to be an electrician! He gave me some good pointers on how to do what i need to do, it's not difficult at all! lol, i'll post again once i have it installed.

[rexpepper651]

i know what you mean about the diagrams its pretty difficult to get used to but once you do its a breeze. its easier to show someone then try to explain in words especially if your like me and learn better with visuals. i hope to see you got them going! 

[AnonRider]

i know what you mean about the diagrams its pretty difficult to get used to but once you do its a breeze. its easier to show someone then try to explain in words especially if your like me and learn better with visuals. i hope to see you got them going! 

Yeah! it'll be great. It's something I've always wanted and would make riding that much more enjoyable and tolerable in the colder months. the heaters should arrive in 11- 15 days (coming from china, i gather.)