Cocked up my clearances!!

[the_63]

Intake shims were 262 and exhaust shims were 272. Smallest feeler blade I've got is 0.04mm and when I checked the clearances that wouldn't fit. So intake clearance should be max 0.03mm. I put the intake shims (262) into the exhaust buckets and measured again. I used the 0.1mm and the 0.06mm blades together and they wouldn't fit, but the 0.1mm and the 0.05mm would.  This means that the exhaust clearance with the 272 shims was 0.03mm.

Now I've FINALLY got the shims I wanted the exhaust clearance has changed, and is now 0.15mm with the 262 shims    Far too big 
Intake shims are now 260 shims, brake side clearance is 0.05mm. This is exactly what I was aiming for.  Check the other side, 0.05mm, doesn't fit  0.04mm, doesn't fit  The only thing I can deduce is that clutch side intake clearance was 0.01mm and is now 0.03mm. Too small 

Totally f%&ked off

Chris