Fiberglass Tailsection/Solo seat Mold - GONE!

[phlogistian]

All righty then! Let's start with the mold for the tailsection/solo seat that I built. The mold is made of fiberglass with a gelcoat surface. You have to clamp the two pieces together, coat it with mold release, then lay up fiberglass inside. If you know what you are doing this should look simple. If you don't know what you are doing, you'll likely not get a good part & could ruin the mold. It will need a little bit of love to fix a few small blemishes, but no problem if you know what you're doing.
Anyway, if you are interested in making cool solo seat tailsections for other enthusiasts (& you would be willing to do so because you're an enthusiast & not trying to get rich!), let me know, you can have the mold for FREE. You'll have to pay shipping and the mold is kinda large, but very light.

Mold has gone to a new home. Hopefully the new custodian will be able to make use of it

You cannot view this attachment.You cannot view this attachment.You cannot view this attachment.