Carb intake rubber torque

[andybb]

What torque do I need to tighten the two bolts holding the intake rubbers on ?

[herennow]

I would not go very tight , it has an oring behind it and if you tighten too tight you risk warping the base. I'd just go by feel, with maybe a small drop of blue loctite to stop it coming loose.

[andybb]

Thankyou for the reply 

[Bluesmudge]

It's a Philips head/JIS bolt, so I don't think you could go too tight anyways. Even with a big honkin screwdriver you can only toque it so much before the driver cams out. I wouldn't over think it.