Parts Sold:
Tank
Left and Right Rear Fairings
Under Seat Pan
Flat Gauge Cluster
Petcock
Headlight & Fork Brackets
Sonic Springs
Motor Top End (Valves, Shims, & Buckets too)
Left & Right Fork Tubes
Fork Brace
Front Fender
Front Axle
Front Brake Pads
Clutch Perch, Handle, and Cable
Stock Gauge Cluster
R6 Rear Shock
Intake & Exhaust Cams
Front & Rear Sprockets
Chain
Signal Generator
Carburetors
Full Exhaust
Ignition & keys
Rear Brake Master Cylinder
Titled Frame
Front Wheel
1999 GS500E
17,951 Miles
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/null_zps0b6f1117.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/null_zps0b6f1117.jpg.html)
This is the bike in its current condition
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/058409F7-3B49-4091-8D04-AF80495A46E6_zpsisvwparc.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/058409F7-3B49-4091-8D04-AF80495A46E6_zpsisvwparc.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/48A5B25B-A3D1-484D-88A6-4BC93ABB7965_zps24jxdn62.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/48A5B25B-A3D1-484D-88A6-4BC93ABB7965_zps24jxdn62.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/68472155-44FB-4F6B-94CA-B9C8BBBF51D6_zpspaqvcfua.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/68472155-44FB-4F6B-94CA-B9C8BBBF51D6_zpspaqvcfua.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/2F27F3CD-28D2-401C-A7A1-07990D242332_zpsau0sxzqb.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/2F27F3CD-28D2-401C-A7A1-07990D242332_zpsau0sxzqb.jpg.html)
The motor has something wrong with it. The exhaust is no longer stock. I am planning to keep the turn signals, bar end mirrors, and the regulator/rectifier. The rest would be up for grabs.
Katana rear wheel with 150/70 Bridgestone BT-023 with 3551 miles (put on bike 6/14/13)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/3F2B5C3F-6326-4EBA-8174-2EB61311C270_zpsj2phupi9.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/3F2B5C3F-6326-4EBA-8174-2EB61311C270_zpsj2phupi9.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/C69BE046-3CDD-4604-86C3-213BBD96362B_zpshiqwgw39.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/C69BE046-3CDD-4604-86C3-213BBD96362B_zpshiqwgw39.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/414662FE-11B4-4FE3-A10F-6E4853CDD3BF_zpsbgnxawsr.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/414662FE-11B4-4FE3-A10F-6E4853CDD3BF_zpsbgnxawsr.jpg.html)
Handlebar Controls
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/C0C61671-4ACF-489C-812D-D21A1E9B46AC_zpswncnx6bp.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/C0C61671-4ACF-489C-812D-D21A1E9B46AC_zpswncnx6bp.jpg.html)
Stock Rear wheel with worn-out Shinko tire in the stock dark gray color
Stock Rear Tail Light
I still have 1 good Exhaust Cam.
Lots of other parts. If there is something else you need let me know and I will see if I have it.
Thanks!
-Andy
I need a headlight! And if cheap i may want the right coil pack.
how much for the tank?
I have someone interested in the tank, rear fairings, and drag bars and someone else interested in both sprockets and the chain.
I am waiting until Saturday to see if a deal on a motor works out or not. Also I am waiting to see if there's enough interest in a fair amount of the parts.
Thanks,
-Andy
Quote from: pyromechanic on October 22, 2014, 02:41:53 PM
I need a headlight! And if cheap i may want the right coil pack.
I am keeping the headlight. The right coil pack is detached from the spark plug wire. The left coil looks exactly like it but I'm not entirely sure. If it is and I do part the bike out you've got dibs.
-Andy
Quote from: GS500Schultz on October 22, 2014, 03:32:22 PM
how much for the tank?
I have someone in NC interested in the tank already.
I'll let you know if it doesn't work out.
-Andy
How much are you looking to get for the underpan with with seat lock and taillight, chain, gauge cluster bracket?
Also are your fuel hoses and petcock available?
Quote from: Gs500_Rugger on October 23, 2014, 03:18:27 PM
How much are you looking to get for the underpan with with seat lock and taillight, chain, gauge cluster bracket?
Also are your fuel hoses and petcock available?
I'm sorry, I thought I had responded to you already.
Does $120 for everything, plus shipping, sound fair? I have no idea what shipping might cost as the pan is a solid piece of 14 gauge steel. That also would include the petcock and some brand new fuel line. My current fuel lines are a mess. I did have someone interested in the chain but he hasn't gotten back with me.
Feel free to make an offer. I just know I put a lot of hours in to that pan even though it may not look it. It dramatically increases the storage under the seat which is what I was looking to do. I was able to smuggle a full quart of oil under the seat when I forgot my bag and apparently forgot I was riding my bike.
A note on the petcock: I've never seen it function as designed. It may very well if all hoses were routed correctly but the previous owner disconnected the reserve hose and routed it in to the petcock in such a way that it is ON when set to Prime and off when straight down. It always worked for me so I just never messed with it.
I won't know for certain until Sunday-ish if I'm parting the bike out or not.
Thanks,
-Andy
PM sent!
Let me know how much you would want for the black right side cover
Quote from: jtl216 on October 24, 2014, 09:54:35 PM
Let me know how much you would want for the black right side cover
I have someone interested in both side covers right now. If it falls through I will let you know.
Any word yet if you're still parting it out or fixing the bike?
Quote from: Gs500_Rugger on October 27, 2014, 09:41:25 AM
Any word yet if you're still parting it out or fixing the bike?
I just called my friend about an hour ago letting him know that I wanted to buy his SV. The motor on this thing has something wrong with it and I'm too tired of working on it to mess with it any more.
I'm going to change the thread title, if possible, and send PM's to people that had PM'd me about parts.
Thanks,
-Andy
Quote from: pyromechanic on October 22, 2014, 02:41:53 PM
I need a headlight! And if cheap i may want the right coil pack.
Do you still need a headlight? Mine is now available. My new (to me) SV650 came naked so I didn't need it for a conversion.
-Andy
Parts are still available.
I have sold:
Under Seat Pan
Gauge Cluster Mount
Petcock
Parts Spoken For:
Gas Tank
Rear Fairings/Plastics
Parts I still Have:
Katana rear wheel with 150/70 Bridgestone BT-023 with around 3500 miles
Stock front wheel with 110/70 Bridgestone S20 with around 3500 miles
Both were painted gloss black at the same time, had tires put on at the same time, and were installed at the same time
R6 Rear Shock
I have everything needed to install on a GS500
Drag Bars
Sonic Springs (I believe they are .85)
Stock Rear wheel with worn-out Shinko tire in the stock dark gray color
DID X-Ring chain with non-rivet master link with 3500 miles
17 Tooth Sunstar 333 front sprocket
JTR 823-39 39 Tooth (stock ratio) rear sprocket
Chain and sprockets were all installed at the same time
Chain and sprockets are off the bike and ready to be boxed and shipped
Clear Titled frame
Set of rear EBC pads with ~1000 miles on them
Brand New set of Galfer front pads still in the plastic
Stock Rear Tail Light
Stock Luggage Bar/Handles (I'm not really sure what these things are called)
Straight Front Forks
Headlight Brackets
Headlight
Exhaust
Stock headers/pipe
Welded on adapter to fit D&D slip-on
Slip-On repacked and riveted back together
Can was painted black with VHT Flame Proof and then Satin Clear with VHT Flame Proof
Ends and band are Chrome/Polished
Some rash on the band/clamp
Paint has been nicked on the can
Dent in one of the end caps that I wasn't able to straighten when I had it apart. Doesn't affect performance or sound
The slip-on and pipes need to go together to fit a GS500
Lots of other parts. I know the camshafts and buckets are good in the motor. Frame is clean and clear titled. If there is something else you need let me know and I will see if I have it.
-Andy
I have updated the first post with details and pictures.
Andy where are you located?
I'm just outside of Charlotte, NC. Not very far from Charlotte Motor Speedway or whatever it is called now.
-Andy
How much are you for on the R6 rear shock and install bits?
Are you willing to part with the cylinder head? I have a cover, I just need the head.. and if so, how much? :whisper:
I have updated the top of the first post with current parts sold.
Lots of parts still for sale.
Bump.
Parts still for sale...
Katana rear wheel with 150/70 Bridgestone BT-023 with around 3500 miles
Stock front wheel with 110/70 Bridgestone S20 with around 3500 miles
Both were painted gloss black at the same time, had tires put on at the same time, and were installed at the same time
R6 Rear Shock
I have everything needed to install on a GS500
Drag Bars
Stock Rear wheel with worn-out Shinko tire in the stock dark gray color
DID X-Ring chain with non-rivet master link with 3500 miles
17 Tooth Sunstar 333 front sprocket
JTR 823-39 39 Tooth (stock ratio) rear sprocket
Chain and sprockets were all installed at the same time
Chain and sprockets are off the bike and ready to be boxed and shipped
Clear Titled frame
Set of rear EBC pads with ~1000 miles on them
Brand New set of Galfer front pads still in the plastic
Stock Rear Tail Light
Stock Luggage Bar/Handles (I'm not really sure what these things are called)
Straight Front Forks
Exhaust
Stock headers/pipe
Welded on adapter to fit D&D slip-on
Slip-On repacked and riveted back together
Can was painted black with VHT Flame Proof and then Satin Clear with VHT Flame Proof
Ends and band are Chrome/Polished
Some rash on the band/clamp
Paint has been nicked on the can
Dent in one of the end caps that I wasn't able to straighten when I had it apart. Doesn't affect performance or sound
The slip-on and pipes need to go together to fit a GS500
Lots of other parts. I know the camshafts and buckets are good in the motor. Frame is clean and clear titled. If there is something else you need let me know and I will see if I have it.
How much would you want for the forks? Also potentially interested in the frame, but I'm sure it would be too unreasonable to ship. Thanks.
Quote from: GSRiderDad on December 03, 2014, 03:00:04 PM
How much would you want for the forks? Also potentially interested in the frame, but I'm sure it would be too unreasonable to ship. Thanks.
I sent you a PM.
Do you still have the front turn signals?
Quote from: kord_f on December 03, 2014, 04:18:36 PM
Do you still have the front turn signals?
I don't think so but I'll check to be sure. I remember the bike came with one set but I can't remember if they were back or front. I ended up replacing all 4 with smaller units. Would you be interested in the rears if that's all I have? They should work up front.
-Andy
Could you post a picture? I might be interested.
Quote from: kord_f on December 05, 2014, 01:49:12 PM
Could you post a picture? I might be interested.
Sorry it took me a couple days to get back with you. I had to dig these out of my pile of parts. I didn't realize one lens has some sort of milky stain on it. It was like that when I got it. I'm trying to get it off and restore the lens somewhat. I'm pretty certain they are rear signals.
Let me know if you're interested at all and we can go from there.
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/6B2CF5E9-E386-4873-9439-90B579324418_zpsv4vdzeqm.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/6B2CF5E9-E386-4873-9439-90B579324418_zpsv4vdzeqm.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/D45C7107-74E0-4735-8435-497D3CD6CD97_zps2lrhpbp0.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/D45C7107-74E0-4735-8435-497D3CD6CD97_zps2lrhpbp0.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/2F3AAC84-14BE-45B1-8341-E2862F7FFB33_zpsdb7nenqh.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/2F3AAC84-14BE-45B1-8341-E2862F7FFB33_zpsdb7nenqh.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/C2643985-7A95-40F3-974E-42479E9391F3_zpssxhldlql.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/C2643985-7A95-40F3-974E-42479E9391F3_zpssxhldlql.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/0F8F5AF3-2A8D-434B-9BEF-1025DE3268AB_zpshfnj41lz.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/0F8F5AF3-2A8D-434B-9BEF-1025DE3268AB_zpshfnj41lz.jpg.html)
Bump.
Parts still for sale. I am updating my first post with everything sold.
Thanks!
PM sent
R6 shock still available?
Slug- I was the first guy who asked about the shock, to my knowledge it is still available. He offered a reasonable price but I decided to hold off on buying one until this summer when I'm home (long story). I have very mixed feelings about you wanting it (BACK OFF!), but I suppose I snoozed, I lose, so to speak.
I will try, maybe tomorrow, to get some pictures of the bike in its current state and pictures of some of the parts I have left. Maybe that will give everyone a better idea of what I have left.
-Andy
I updated my first post with some new pictures and more specific dates and mileages.
Do you still have the cams? I need an intake cam.
Quote from: SmithvilleFlats on January 03, 2015, 09:47:47 AM
Do you still have the cams? I need an intake cam.
I do have both of the cams. They are in really good shape as I had to buy one to replace a messed up intake cam. It's not original to my bike; I think it came off a '96.
-Andy
Quote from: amkluttz on October 22, 2014, 05:58:04 AM
Parts Sold:
Tank
Left and Right Rear Fairings
Under Seat Pan
Flat Gauge Cluster
Petcock
Headlight & Fork Brackets
Sonic Springs
Motor Top End (Valves, Shims, & Buckets too)
Left & Right Fork Tubes
Fork Brace
Front Fender
Front Axle
Front Brake Pads
Clutch Perch, Handle, and Cable
Stock Gauge Cluster
R6 Rear Shock
Intake & Exhaust Cams
1999 GS500E
17,951 Miles
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/null_zps0b6f1117.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/null_zps0b6f1117.jpg.html)
This is the bike in its current condition
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/058409F7-3B49-4091-8D04-AF80495A46E6_zpsisvwparc.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/058409F7-3B49-4091-8D04-AF80495A46E6_zpsisvwparc.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/48A5B25B-A3D1-484D-88A6-4BC93ABB7965_zps24jxdn62.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/48A5B25B-A3D1-484D-88A6-4BC93ABB7965_zps24jxdn62.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/68472155-44FB-4F6B-94CA-B9C8BBBF51D6_zpspaqvcfua.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/68472155-44FB-4F6B-94CA-B9C8BBBF51D6_zpspaqvcfua.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/2F27F3CD-28D2-401C-A7A1-07990D242332_zpsau0sxzqb.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/2F27F3CD-28D2-401C-A7A1-07990D242332_zpsau0sxzqb.jpg.html)
The motor has something wrong with it. The exhaust is no longer stock. I am planning to keep the turn signals, bar end mirrors, and the regulator/rectifier. The rest would be up for grabs.
Katana rear wheel with 150/70 Bridgestone BT-023 with 3551 miles (put on bike 6/14/13)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/3F2B5C3F-6326-4EBA-8174-2EB61311C270_zpsj2phupi9.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/3F2B5C3F-6326-4EBA-8174-2EB61311C270_zpsj2phupi9.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/C69BE046-3CDD-4604-86C3-213BBD96362B_zpshiqwgw39.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/C69BE046-3CDD-4604-86C3-213BBD96362B_zpshiqwgw39.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/414662FE-11B4-4FE3-A10F-6E4853CDD3BF_zpsbgnxawsr.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/414662FE-11B4-4FE3-A10F-6E4853CDD3BF_zpsbgnxawsr.jpg.html)
Stock front wheel with 110/70 Bridgestone S20 with 3551 miles (put on bike 6/14/13)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/D502DAD1-BD50-4DAA-AC52-AFA1501F54C7_zps76hzg5ob.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/D502DAD1-BD50-4DAA-AC52-AFA1501F54C7_zps76hzg5ob.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/243547C5-BDFA-49EC-9988-955420186BED_zps80idazhn.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/243547C5-BDFA-49EC-9988-955420186BED_zps80idazhn.jpg.html)
Both were painted gloss black at the same time, had tires put on at the same time, and were installed at the same time
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/null_zps2e91f277.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/null_zps2e91f277.jpg.html)
Drag Bars
Handlebar Controls
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/C0C61671-4ACF-489C-812D-D21A1E9B46AC_zpswncnx6bp.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/C0C61671-4ACF-489C-812D-D21A1E9B46AC_zpswncnx6bp.jpg.html)
Stock Rear wheel with worn-out Shinko tire in the stock dark gray color
DID X-Ring chain with non-rivet master link with 3551 miles
17 Tooth Sunstar 333 front sprocket
JTR 823-39 39 Tooth (stock ratio) rear sprocket
Chain and sprockets were all installed at the same time
Chain and sprockets have been cleaned and lubed, are off the bike and ready to be boxed and shipped
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/15764C8F-4F08-49A5-BCAD-983F7CDB8506_zpsklxmrewc.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/15764C8F-4F08-49A5-BCAD-983F7CDB8506_zpsklxmrewc.jpg.html)
Clear Titled frame
Set of rear EBC pads with ~1000 miles on them
Stock Rear Tail Light
Stock Luggage Bar/Handles (I'm not really sure what these things are called)
Exhaust
Stock headers/pipe
Welded on adapter to fit D&D slip-on
Slip-On repacked and riveted back together
Can was painted black with VHT Flame Proof and then Satin Clear with VHT Flame Proof
Ends and band are Chrome/Polished
Some rash on the band/clamp
Paint has been nicked on the can
Dent in one of the end caps that I wasn't able to straighten when I had it apart. Doesn't affect performance or sound
The slip-on and pipes need to go together to fit a GS500
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/10A8DE71-8595-42DD-ADDA-C8B964DA2BDA_zpsgaxoqzdc.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/10A8DE71-8595-42DD-ADDA-C8B964DA2BDA_zpsgaxoqzdc.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/735D85D2-9547-4C41-A54B-ECBD098D0EB5_zpsfvejiwpc.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/735D85D2-9547-4C41-A54B-ECBD098D0EB5_zpsfvejiwpc.jpg.html)
(http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Suzi/FBD90836-FB5E-4514-B8D3-8F43177A92A8_zpshr2bmvgd.jpg) (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/FBD90836-FB5E-4514-B8D3-8F43177A92A8_zpshr2bmvgd.jpg.html)
Carburetor
Dynojet Kit set up for slip-on and K&N Filter
Has been looked over by The Buddha
[IMG]http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Su (http://s1057.photobucket.com/user/amkluttz0819/media/Bike%20Pics/Suzi/913A9853-D653-48E0-9302-4E870D483647_zpsu1iiaa5j.jpg.html)
Do you still have chain and sprockets
Quote from: Nikkoortiz on January 14, 2015, 01:15:02 PM
Do you still have chain and sprockets
I do. I also responded to your PM.
-Andy
Do you still Have the Carbs? I need the choke lever and holder clips and any other parts associated to operate the choke. Sorry if i missed that you sold them already. Thanks
Quote from: Hoopes91 on January 17, 2015, 04:28:54 PM
Do you still Have the Carbs? I need the choke lever and holder clips and any other parts associated to operate the choke. Sorry if i missed that you sold them already. Thanks
I do have the carbs, the choke cable, and the left hand controls that operate the choke. The choke cable casing got close to the motor and deformed a little but the cable works fine. I'm not sure what you mean by "holder clips".
-Andy
there are two small black clips that hold the choke lever to the carb. Part # 48,49 maybe 28 on the microfiche in the link below.
http://www.suzukipartshouse.com/oemparts/a/suz/50d3f416f8700230d8b4c2c8/carburetor
do you happen to have the reserve and On Fuel lines?
Quote from: Hoopes91 on January 17, 2015, 08:53:59 PM
there are two small black clips that hold the choke lever to the carb. Part # 48,49 maybe 28 on the microfiche in the link below.
http://www.suzukipartshouse.com/oemparts/a/suz/50d3f416f8700230d8b4c2c8/carburetor
I apologize for leaving you hanging so long. I didn't get notification of your post until today. I have the complete carb setup and the choke is set up and working. The clips that you seem to be referring to look as if they hold the choke lever on each individual carb. I can get you a picture later when I get home so that I can see if we are on the same page. Let me know if you are still interested.
-Andy
Quote from: Rick805GS on January 20, 2015, 11:09:07 PM
do you happen to have the reserve and On Fuel lines?
The fuel lines were sold with the petcock, sorry.
-Andy
Quote from: amkluttz on January 21, 2015, 07:06:41 AM
Quote from: Hoopes91 on January 17, 2015, 08:53:59 PM
there are two small black clips that hold the choke lever to the carb. Part # 48,49 maybe 28 on the microfiche in the link below.
http://www.suzukipartshouse.com/oemparts/a/suz/50d3f416f8700230d8b4c2c8/carburetor
I apologize for leaving you hanging so long. I didn't get notification of your post until today. I have the complete carb setup and the choke is set up and working. The clips that you seem to be referring to look as if they hold the choke lever on each individual carb. I can get you a picture later when I get home so that I can see if we are on the same page. Let me know if you are still interested.
-Andy
Pic is nice. I just need those parts that I referenced. My carbs are fine I am just missing the outside choke pieces. They were not on the bike when I bought it.
just wondering how much for handle bars w/ front master and anything else still connected, and rear tire?
Im interested in the pistons and barrells if they are anygood
Do you still have the front forks? And front fender, and if you do how much? Thanks.
Quote from: The fink on February 10, 2015, 12:14:52 AM
Do you still have the front forks? And front fender, and if you do how much? Thanks.
Front fender and forks have been sold.
Quote from: amkluttz on February 12, 2015, 08:38:12 PM
Quote from: The fink on February 10, 2015, 12:14:52 AM
Do you still have the front forks? And front fender, and if you do how much? Thanks.
Front fender and forks have been sold.
ok thanks, can you tell me what you still have?
How much would you want for the carb assy, with shipping to 16101?
Quote from: The fink on February 15, 2015, 03:52:45 AM
Quote from: amkluttz on February 12, 2015, 08:38:12 PM
Quote from: The fink on February 10, 2015, 12:14:52 AM
Do you still have the front forks? And front fender, and if you do how much? Thanks.
Front fender and forks have been sold.
ok thanks, can you tell me what you still have?
I currently still have:
Frame with Clean Title
Lower half of motor
Carbs
Stock Front Wheel & Tire
Katana Rear Wheel & Tire
Stock Rear Wheel & Tire
Upper & Lower Triple Clamps
Some Hand Control Pieces
Complete Wiring Harness
Swing Arm
Front & Rear Brake Calipers
There are some other odd & ends but I think that is the majority of the big parts
-Andy
Please see note at the very beginning of the first post.
How much for left and right hand controls?
you've got a PM
is that tail light and turn signal set up still available?
Quote from: Kahlua85 on February 23, 2015, 08:24:10 AM
is that tail light and turn signal set up still available?
I have the stock tail light and turn signals but the custom under seat pan has been sold.
do you still have the front fender?
Quote from: Hoopes91 on February 23, 2015, 07:42:52 PM
do you still have the front fender?
Front fender has been sold.
Got the crankshaft?
Quote from: Reeko236 on March 01, 2015, 12:40:43 PM
Got the crankshaft?
I'm sure I do but I have no idea what condition it is in. Do I have to separate the cases to get to it?
-Andy
Yes :( was your engine running well? If so I may pick up the whole case.. Lmk!
Quote from: Reeko236 on March 01, 2015, 01:57:50 PM
Yes :( was your engine running well? If so I may pick up the whole case.. Lmk!
The engine had some issues but I have no idea what they were. Someone told me that it may be the rings and seals but that was a guess from the person that bought my top end. I would imagine the crank is in good condition but I can't know until I tear it apart. With a newborn in the house I'm not entirely sure when that may be. If it's something you're interested in we could probably work out a deal. Where are you located?
-Andy
In I'm Texas, zip code 78666. Thanks!
Andy- I PM'd ya. Thanks!
Are those the bike master drag bars?? Jw because I'm thinking of ordering them from jcwhitney. I think there like $25?
how much for the katana wheel?
Quote from: inkfiend138 on March 06, 2015, 10:24:09 PM
Are those the bike master drag bars?? Jw because I'm thinking of ordering them from jcwhitney. I think there like $25?
They are bikemaster drag bars and yes they are fairly cheap brand new. They have been good bars.
Quote from: rainbballer17 on March 10, 2015, 07:58:49 PM
how much for the katana wheel?
It depends on what exactly you want.
$125 + Shipping for the wheel and tire
$75 + Shipping for just the wheel
That may seem expensive for just the wheel but that includes the cost of having to get the tire removed. I would prefer to sell the wheel/tire combo as the tire is not usable for me. If I have the tire removed I can not guarantee that the paint won't be scratched/removed by the machine since they are painted. I will, however, use the same shop that put it on without scratching it.
The wheel does have a rotor but does not have a sprocket. Those prices are without the cush drive but the GS cush drive works on these wheels. The tire has 3500+ miles on it but it doesn't appear to have much wear. I bought a dual compound sport touring tire because I wanted longevity. I've read reviews of this tire going 8000+ miles. There should be pictures in the first post.
-Andy
What would I all need to put it on the bike?? Like any new parts?
It uses the stock GS rear axle. Some people messed around with the rear caliper but all I did was mount the wheel and use the stock caliper and I never had a problem. The rear pads wear a little unevenly. I did have to clearance the chain guard a little for the rear tire so that it wouldn't hit. I also had to heat and bend the brake arm to clearance the other side of the tire. I've read that you can just buy a brake arm from a Bandit (I think) and you don't have to mess with bending your stock one. It's a fairly easy swap to do; the hardest part for me was getting the wheel/tire in the swing arm and around the brake caliper without scratching the wheel. You will need your cush drive and a rear sprocket but if your current one isn't in need of replacement you can just use that one.
There is an entire thread on here, and I believe on the GS Wiki, about doing this swap. I think it was from member Turd Ferguson. That's where I got all of my info.
-Andy
A couple asked about them but I have not seen where they are sold... Do you still have the carbs?
Quote from: skreemer on April 06, 2015, 09:15:53 AM
A couple asked about them but I have not seen where they are sold... Do you still have the carbs?
The carbs have been sold. I'm sorry, I forgot to add that to the list of things sold along with the chain and sprockets.
-Andy
Is the exhaust still available? If so, how much with shipping to 77084? Thanks!
Quote from: TXTrey on May 07, 2015, 08:09:04 AM
Is the exhaust still available? If so, how much with shipping to 77084? Thanks!
I do still have the exhaust. Give me several days because I will have to take the whole thing to UPS to get a shipping quote from them. As soon as I do I will get you a total price including shipping.
Thanks,
-Andy
Will you sell the ignition along with the key?
Quote from: Matty206 on June 20, 2015, 11:05:34 PM
Will you sell the ignition along with the key?
I will. I sent you a PM.
-Andy
Bump!
I still have a frame with a clear title that I am tired of looking at. I would rather not send it to the scrap pile but I'm not going to hang on to it forever. Also still have the lower half of a motor and some other parts hanging around.
Make an offer.
Thanks,
-Andy
Hi,
Do you still have the front forks? Are the seal wipers cracked? How much including shipping to a business address zip 15928? Do you have PayPal?
Also looking for a stock handlebar or aftermarket with the same bends or one that is more upright position.
Please email me direct at tmccreary13@hotmail.com as I do not frequent the website often.
Thanks,
Tim McCreary
Hi do you have the signal generator and CDI still?
How much shipped to 91381?
Thanks
Quote from: lucas on October 06, 2015, 09:23:08 PM
Hi do you have the signal generator and CDI still?
How much shipped to 91381?
Thanks
The signal generator has been sold. If by CDI you mean the igniter box mounted next to the battery I do still have that. Let me know if you are interested in one without the other.
Thanks,
-Andy
Yeah I would be interested in the CDI alone. In the OP you say there was something wrong with the motor, did you ever figure out what it was?
I ask because there is apparently something wrong with my motor but I suspect it may be my CDI ;)
Quote from: lucas on October 07, 2015, 08:48:43 AM
Yeah I would be interested in the CDI alone. In the OP you say there was something wrong with the motor, did you ever figure out what it was?
I ask because there is apparently something wrong with my motor but I suspect it may be my CDI ;)
I didn't find out what was going on with my motor but it was making a terrible "clack" sound around the valves so I'm sure the igniter had nothing to do with it. That being said I can't say 100% that the igniter is in working order.
Thanks,
-Andy
Yeah it is kind of a shame that these CDIs are black boxes of mystery. If only someone knew a way to test this little bugger out...