News:

Need a manual?  Buy a Clymer manual Here

Main Menu

'99 Part Out

Started by amkluttz, October 22, 2014, 05:58:04 AM

Previous topic - Next topic

Hoopes91

Do you still Have the Carbs? I need the choke lever and holder clips and any other parts associated to operate the choke. Sorry if i missed that you sold them already. Thanks
1998 Black Suzuki GS500E (01/04/2015) 13,336miles
Mods: K&N Lunch Box filter, Dynojet stage 3 kit, Stock Exhaust.
Future Mods: Delkevic full system with 13" SS tri-oval can, led light,

amkluttz

Quote from: Hoopes91 on January 17, 2015, 04:28:54 PM
Do you still Have the Carbs? I need the choke lever and holder clips and any other parts associated to operate the choke. Sorry if i missed that you sold them already. Thanks

I do have the carbs, the choke cable, and the left hand controls that operate the choke.  The choke cable casing got close to the motor and deformed a little but the cable works fine.  I'm not sure what you mean by "holder clips".

-Andy

Hoopes91

there are two small black clips that hold the choke lever to the carb. Part # 48,49 maybe 28 on the microfiche in the link below.

http://www.suzukipartshouse.com/oemparts/a/suz/50d3f416f8700230d8b4c2c8/carburetor
1998 Black Suzuki GS500E (01/04/2015) 13,336miles
Mods: K&N Lunch Box filter, Dynojet stage 3 kit, Stock Exhaust.
Future Mods: Delkevic full system with 13" SS tri-oval can, led light,

Rick805GS

do you happen to have the reserve and On Fuel lines?

amkluttz

Quote from: Hoopes91 on January 17, 2015, 08:53:59 PM
there are two small black clips that hold the choke lever to the carb. Part # 48,49 maybe 28 on the microfiche in the link below.

http://www.suzukipartshouse.com/oemparts/a/suz/50d3f416f8700230d8b4c2c8/carburetor

I apologize for leaving you hanging so long.  I didn't get notification of your post until today.  I have the complete carb setup and the choke is set up and working.  The clips that you seem to be referring to look as if they hold the choke lever on each individual carb.  I can get you a picture later when I get home so that I can see if we are on the same page.  Let me know if you are still interested.

-Andy

amkluttz

Quote from: Rick805GS on January 20, 2015, 11:09:07 PM
do you happen to have the reserve and On Fuel lines?

The fuel lines were sold with the petcock, sorry.

-Andy

Hoopes91

Quote from: amkluttz on January 21, 2015, 07:06:41 AM
Quote from: Hoopes91 on January 17, 2015, 08:53:59 PM
there are two small black clips that hold the choke lever to the carb. Part # 48,49 maybe 28 on the microfiche in the link below.

http://www.suzukipartshouse.com/oemparts/a/suz/50d3f416f8700230d8b4c2c8/carburetor

I apologize for leaving you hanging so long.  I didn't get notification of your post until today.  I have the complete carb setup and the choke is set up and working.  The clips that you seem to be referring to look as if they hold the choke lever on each individual carb.  I can get you a picture later when I get home so that I can see if we are on the same page.  Let me know if you are still interested.

-Andy
Pic is nice. I just need those parts that I referenced. My carbs are fine I am just missing the outside choke pieces. They were not on the bike when I bought it.
1998 Black Suzuki GS500E (01/04/2015) 13,336miles
Mods: K&N Lunch Box filter, Dynojet stage 3 kit, Stock Exhaust.
Future Mods: Delkevic full system with 13" SS tri-oval can, led light,

clifford97

just wondering how much for handle bars w/ front master and anything else still connected, and rear tire?

bugsy27

Im interested in the pistons and barrells if they are anygood

The fink

Do you still have the front forks? And front fender, and if you do how much? Thanks.
Be who YOU are, and say what YOU feel, because those who mind don't matter, and those who matter don't mind.
-Dr. Seuss

amkluttz

Quote from: The fink on February 10, 2015, 12:14:52 AM
Do you still have the front forks? And front fender, and if you do how much? Thanks.

Front fender and forks have been sold.

The fink

Quote from: amkluttz on February 12, 2015, 08:38:12 PM
Quote from: The fink on February 10, 2015, 12:14:52 AM
Do you still have the front forks? And front fender, and if you do how much? Thanks.

Front fender and forks have been sold.
ok thanks, can you tell me what you still have?
Be who YOU are, and say what YOU feel, because those who mind don't matter, and those who matter don't mind.
-Dr. Seuss

RZMike

How much would you want for the carb assy, with shipping to 16101?

amkluttz

Quote from: The fink on February 15, 2015, 03:52:45 AM
Quote from: amkluttz on February 12, 2015, 08:38:12 PM
Quote from: The fink on February 10, 2015, 12:14:52 AM
Do you still have the front forks? And front fender, and if you do how much? Thanks.

Front fender and forks have been sold.
ok thanks, can you tell me what you still have?

I currently still have:

Frame with Clean Title
Lower half of motor
Carbs
Stock Front Wheel & Tire
Katana Rear Wheel & Tire
Stock Rear Wheel & Tire
Upper & Lower Triple Clamps
Some Hand Control Pieces
Complete Wiring Harness
Swing Arm
Front & Rear Brake Calipers
There are some other odd & ends but I think that is the majority of the big parts

-Andy

amkluttz

Please see note at the very beginning of the first post. 

The fink

How much for left and right hand controls?
Be who YOU are, and say what YOU feel, because those who mind don't matter, and those who matter don't mind.
-Dr. Seuss

GS500Schultz

You don't own a project bike..
The Project bike owns you!

Kahlua85

is that tail light and turn signal set up still available?

amkluttz

Quote from: Kahlua85 on February 23, 2015, 08:24:10 AM
is that tail light and turn signal set up still available?

I have the stock tail light and turn signals but the custom under seat pan has been sold.

Hoopes91

do you still have the front fender?
1998 Black Suzuki GS500E (01/04/2015) 13,336miles
Mods: K&N Lunch Box filter, Dynojet stage 3 kit, Stock Exhaust.
Future Mods: Delkevic full system with 13" SS tri-oval can, led light,

SMF spam blocked by CleanTalk